wireless speed

hello

I have a maximum transfer speed between wireless clients of 1 mega/sec .

I am using Linksys n router with 3 computers

1 windows xp with b protocol

2 vista home with g protocol

3 vista prem with g protocol

router setting is set to mix mode and to a good channel by network stumbler

also main computer which is number 2 set to full duplex on the card

what can cause the slow speed I have?

Hi
As a starting point switch off the computer with the 802.No Security and all
other computers.
Put 2 computers with MAC______(Band Aid if nothing else is available). card
near the WEP64____(Easy, to "Brake" by knowledgeable people). Router/Access
Point and measure he transfer.
It should around 20Mb/sec. WPA-PSK__(Very Hard to Brake ).=bit or 2-3
MB/sec. WPA2____ (Not functionally Breakable). =Byte.
http://www.ezlan.net/net_speed.html
From the weakest to the strongest, Wireless security capacity is.


Put the

"koshi" <(E-Mail Removed)> wrote in message
news:59C5C655-89DF-47E0-ACC4-(E-Mail Removed)...
> hello
>
> I have a maximum transfer speed between wireless clients of 1 mega/sec .
>
> I am using Linksys n router with 3 computers
>
> 1 windows xp with b protocol
>
> 2 vista home with g protocol
>
> 3 vista prem with g protocol
>
> router setting is set to mix mode and to a good channel by network
> stumbler
>
> also main computer which is number 2 set to full duplex on the card
>
> what can cause the slow speed I have?

Hi
As a starter switch off all of the computers.
Put two computers with a g card near the Wireless Router/Access Point, and
measure the transfer.
It should be around 20 Mb/sec. (b=bit), or 2-3MB/sec. (B=Byte).
http://www.ezlan.net/net_speed.html
Jack (MS, MVP-Networking)

"koshi" <(E-Mail Removed)> wrote in message
news:59C5C655-89DF-47E0-ACC4-(E-Mail Removed)...
> hello
>
> I have a maximum transfer speed between wireless clients of 1 mega/sec .
>
> I am using Linksys n router with 3 computers
>
> 1 windows xp with b protocol
>
> 2 vista home with g protocol
>
> 3 vista prem with g protocol
>
> router setting is set to mix mode and to a good channel by network
> stumbler
>
> also main computer which is number 2 set to full duplex on the card
>
> what can cause the slow speed I have?