Wireless Problem with cert

Hi,

i am installing a secure wireless solution with sbs2003, IAS, stand alone
CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
Netgear under Radius-Clients. On the Netgear i have made the settings for
the Radius Server with ip and shared secret and in Network Authentication i
use WPA with Radius and in Data Encrypton TKIP.
Problem is when the Client connects to the Access Point a error message was
generated in the Logfiles for system: ID18 IAS error Access-Request from
Radius-Client has an invalid Message Authenticator Attribut.

Any help would be appreciated.
Bernd

I change the password and everything works fine.

Many thanks !


"No One" <(E-Mail Removed)> schrieb im Newsbeitrag
news:(E-Mail Removed)...
> Had the same problem. Had to use a shared secret for the access point
> and IAS of 13 characters or less to get it to work. The latest
> firmware had the same issue.
>
> On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <(E-Mail Removed)> wrote:
>
> >Hi,
> >
> >i am installing a secure wireless solution with sbs2003, IAS, stand alone
> >CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
> >Netgear under Radius-Clients. On the Netgear i have made the settings for
> >the Radius Server with ip and shared secret and in Network Authentication
i
> >use WPA with Radius and in Data Encrypton TKIP.
> >Problem is when the Client connects to the Access Point a error message
was
> >generated in the Logfiles for system: ID18 IAS error Access-Request from
> >Radius-Client has an invalid Message Authenticator Attribut.
> >
> >Any help would be appreciated.
> >Bernd
> >
>