Wireless PCI adapter for Windows 2000

I am looking for a wireless PCI adapter that supports WPA on Windows
2000. Since Windows 2000 does not have the Wireless Zero
Configuration service like XP does, then the wireless PCI adapter
needs to come with its own utility that lets you use WPA.

I also would like the adapter's software to run as a Windows service
(as opposed to running only when a user logs in) - that way the system
can respond to pings or share requests if no one is logged in. The
software should also allow limited user accounts to use the wireless
connection.

Any recommendations?

(E-Mail Removed) wrote:
> I am looking for a wireless PCI adapter that supports WPA on Windows
> 2000. Since Windows 2000 does not have the Wireless Zero
> Configuration service like XP does, then the wireless PCI adapter
> needs to come with its own utility that lets you use WPA.
>
> I also would like the adapter's software to run as a Windows service
> (as opposed to running only when a user logs in) - that way the system
> can respond to pings or share requests if no one is logged in. The
> software should also allow limited user accounts to use the wireless
> connection.
>
> Any recommendations?

My experience of using PCI adapters is that they only connect when
logged on. Instead, I use an external "bridge" device which connects to
the PC using Ethernet. Many Wireless Access Points will operate in this
mode (I've used ones from US Robotics and Netgear), as well as devices
designed solely for this function. Of course, if you're going to use an
Ethernet connected device, you might consider HomePlug/Powerline.

Phil, London

~ I am looking for a wireless PCI adapter that supports WPA on Windows
~ 2000. Since Windows 2000 does not have the Wireless Zero
~ Configuration service like XP does, then the wireless PCI adapter
~ needs to come with its own utility that lets you use WPA.
~
~ I also would like the adapter's software to run as a Windows service
~ (as opposed to running only when a user logs in) - that way the system
~ can respond to pings or share requests if no one is logged in. The
~ software should also allow limited user accounts to use the wireless
~ connection.
~
~ Any recommendations?

I believe that the Cisco PI21AG will meet all of the stated requirements.

Aaron

On Jul 7, 12:56*pm, Aaron Leonard <Aa...@Cisco.COM> wrote:
> ~ I am looking for a wireless PCI adapter that supports WPA on Windows
> ~ 2000. *Since Windows 2000 does not have the Wireless Zero
> ~ Configuration service like XP does, then the wireless PCI adapter
> ~ needs to come with its own utility that lets you use WPA.
> ~
> ~ I also would like the adapter's software to run as a Windows service
> ~ (as opposed to running only when a user logs in) - that way the system
> ~ can respond to pings or share requests if no one is logged in. *The
> ~ software should also allow limited user accounts to use the wireless
> ~ connection.
> ~
> ~ Any recommendations?
>
> I believe that the Cisco PI21AG will meet all of the stated requirements.

Do you know if I can use WPA-PSK with the Cisco adapter? There is
this FAQ at cisco.com:

http://www.cisco.com/en/US/products/...80094cdc.shtml

"Q. Can I configure Wi-Fi Protected Access-Pre-Shared Key (WPA-PSK)
with the help of the Aironet Client Utility (ACU)?

A. WPA provides a PSK version that is intended for use in small
office, home office (SOHO) or home wireless networks. Cisco ACU does
not support WPA-PSK. The Wireless Zero Configuration utility from
Microsoft Windows supports WPA-PSK for most wireless cards."


So either the adapter doesn't support WPA-PSK, or that FAQ is
referring to an older adapter.

Another thing I forgot to mention is that my computer has PCI 2.1
slots. The only thing I can find about the PI21AG is that it is "PCI
Rev. 2.3 compliant". Any idea if it works with PCI 2.1?

> Any recommendations?

Get one of the wired ethernet adapters instead. That way nothing has to
change on the w2k box. It can use it's plain old ethernet driver and not
have to worry about any other driver or utility software.

-Bill Kearney

On Mon, 7 Jul 2008 10:42:44 -0700 (PDT), "(E-Mail Removed)" <(E-Mail Removed)> wrote:

~ On Jul 7, 12:56*pm, Aaron Leonard <Aa...@Cisco.COM> wrote:
~ > ~ I am looking for a wireless PCI adapter that supports WPA on Windows
~ > ~ 2000. *Since Windows 2000 does not have the Wireless Zero
~ > ~ Configuration service like XP does, then the wireless PCI adapter
~ > ~ needs to come with its own utility that lets you use WPA.
~ > ~
~ > ~ I also would like the adapter's software to run as a Windows service
~ > ~ (as opposed to running only when a user logs in) - that way the system
~ > ~ can respond to pings or share requests if no one is logged in. *The
~ > ~ software should also allow limited user accounts to use the wireless
~ > ~ connection.
~ > ~
~ > ~ Any recommendations?
~ >
~ > I believe that the Cisco PI21AG will meet all of the stated requirements.
~
~ Do you know if I can use WPA-PSK with the Cisco adapter? There is
~ this FAQ at cisco.com:
~
~ http://www.cisco.com/en/US/products/...80094cdc.shtml
~
~ "Q. Can I configure Wi-Fi Protected Access-Pre-Shared Key (WPA-PSK)
~ with the help of the Aironet Client Utility (ACU)?
~
~ A. WPA provides a PSK version that is intended for use in small
~ office, home office (SOHO) or home wireless networks. Cisco ACU does
~ not support WPA-PSK. The Wireless Zero Configuration utility from
~ Microsoft Windows supports WPA-PSK for most wireless cards."

~ So either the adapter doesn't support WPA-PSK, or that FAQ is
~ referring to an older adapter.

The latter case applies. ACU is the client utility for our older
350 series adapters. The client utility for our current CB21AG/PI21AG
adapters is called ADU, and it does support PSK. See a configuration
example here:

http://www.cisco.com/en/US/tech/tk72...tml#config_ca2

~ Another thing I forgot to mention is that my computer has PCI 2.1
~ slots. The only thing I can find about the PI21AG is that it is "PCI
~ Rev. 2.3 compliant". Any idea if it works with PCI 2.1?

Oops. The PI21AG does require PCI 2.3 and is not supported (and probably will
not work) with PCI 2.1.

Could you use a wireless bridge, such as a Linksys WET54G?

Aaron

Aaron Leonard wrote:

>On Mon, 7 Jul 2008 10:42:44 -0700 (PDT), "(E-Mail Removed)"
><(E-Mail Removed)> wrote:
>
>~ On Jul 7, 12:56*pm, Aaron Leonard <Aa...@Cisco.COM> wrote:
>~ > ~ I am looking for a wireless PCI adapter that supports WPA on Windows
>~ > ~ 2000. *Since Windows 2000 does not have the Wireless Zero
>~ > ~ Configuration service like XP does, then the wireless PCI adapter
>~ > ~ needs to come with its own utility that lets you use WPA.
>~ > ~
>~ > ~ I also would like the adapter's software to run as a Windows service
>~ > ~ (as opposed to running only when a user logs in) - that way the
>system
>~ > ~ can respond to pings or share requests if no one is logged in. *The
>~ > ~ software should also allow limited user accounts to use the wireless
>~ > ~ connection.
>~ > ~
>~ > ~ Any recommendations?
>~ >
>~ > I believe that the Cisco PI21AG will meet all of the stated
>requirements.
>~
>~ Do you know if I can use WPA-PSK with the Cisco adapter? There is
>~ this FAQ at cisco.com:
>~
>~
>http://www.cisco.com/en/US/products/...80094cdc.shtml
>~
>~ "Q. Can I configure Wi-Fi Protected Access-Pre-Shared Key (WPA-PSK)
>~ with the help of the Aironet Client Utility (ACU)?
>~
>~ A. WPA provides a PSK version that is intended for use in small
>~ office, home office (SOHO) or home wireless networks. Cisco ACU does
>~ not support WPA-PSK. The Wireless Zero Configuration utility from
>~ Microsoft Windows supports WPA-PSK for most wireless cards."
>
>~ So either the adapter doesn't support WPA-PSK, or that FAQ is
>~ referring to an older adapter.
>
>The latter case applies. ACU is the client utility for our older
>350 series adapters. The client utility for our current CB21AG/PI21AG
>adapters is called ADU, and it does support PSK. See a configuration
>example here:
>
>http://www.cisco.com/en/US/tech/tk72...tml#config_ca2

That is good to know.


>~ Another thing I forgot to mention is that my computer has PCI 2.1
>~ slots. The only thing I can find about the PI21AG is that it is "PCI
>~ Rev. 2.3 compliant". Any idea if it works with PCI 2.1?
>
>Oops. The PI21AG does require PCI 2.3 and is not supported (and probably
>will
>not work) with PCI 2.1.

I used the Cisco Chat feature on your web site and spoke with a sales rep.
I asked him, and he said it is backwards compatible with PCI 2.1, but that it would run at a slightly slower bus speed.


>Could you use a wireless bridge, such as a Linksys WET54G?

I will look into that.

~ >~ Another thing I forgot to mention is that my computer has PCI 2.1
~ >~ slots. The only thing I can find about the PI21AG is that it is "PCI
~ >~ Rev. 2.3 compliant". Any idea if it works with PCI 2.1?
~ >
~ >Oops. The PI21AG does require PCI 2.3 and is not supported (and probably
~ >will
~ >not work) with PCI 2.1.
~
~ I used the Cisco Chat feature on your web site and spoke with a sales rep.
~ I asked him, and he said it is backwards compatible with PCI 2.1, but that it would run at a slightly slower bus speed.

A sales rep would say that, wouldn't he? :^)

I know for a fact that some customers have tried unsuccessfully to use the PI21AG with
computers that have a PCI 2.1 bus. That said, I guess you could give it a go with
your particular systems and see if it works, and get a refund if not.

Cheers,

Aaron

----


~ >Could you use a wireless bridge, such as a Linksys WET54G?
~
~ I will look into that.