Wireless kit not working..during initial install!

I just got the MN-620 wireless kit. I have followed the instructions during
install. But when I connect the DSL router to the wireless base station then
back to the cpu I cannot connect to the internet anymore.
No firewalls are on
Everything is pluged into what it should be, but I can't get passed this
issue.

Help Please?

My 'A' computer is running XP Home Edition Service Pack 2
My DSL Router is a Westell Model 6100

You'll probably need to configure the Router.
When you plug the computer into the router, check in your support tab in the
connection status, for "default gateway"... Open Internet Explorer, and type
in the number sequence (IP address) you see there, including the periods.
This'll take you to the configuration of the router. You may need to contact
your DSL service provider for information about what you need to set.
Normally (SBC in this case) you set the connection type to PPPoE, and enter
your username and password.
When you type in that IP address in your web browser, you are actually
viewing a webpage on the router itself! This is where you can control
everything the router does.
-James G.

"Mark" <(E-Mail Removed)> wrote in message
news:49416F95-C9DC-49A9-A89E-(E-Mail Removed)...
>I just got the MN-620 wireless kit. I have followed the instructions during
> install. But when I connect the DSL router to the wireless base station
> then
> back to the cpu I cannot connect to the internet anymore.
> No firewalls are on
> Everything is pluged into what it should be, but I can't get passed this
> issue.
>
> Help Please?
>
> My 'A' computer is running XP Home Edition Service Pack 2
> My DSL Router is a Westell Model 6100
>
>

We had the same problem with a Westell DSL modem and a Network Everywhere
router. Your DSL ISP should be able to give you the correct settings.
--
Firth


"Mark" wrote:

> I just got the MN-620 wireless kit. I have followed the instructions during
> install. But when I connect the DSL router to the wireless base station then
> back to the cpu I cannot connect to the internet anymore.
> No firewalls are on
> Everything is pluged into what it should be, but I can't get passed this
> issue.
>
> Help Please?
>
> My 'A' computer is running XP Home Edition Service Pack 2
> My DSL Router is a Westell Model 6100
>
>

Thank you for that info James. I am having one major problem though, when I
put in the IP address it thinks for a while then transfers to google.
So I have all the info I need to configure it but I can't get to the router.

"James Gockel" wrote:

> You'll probably need to configure the Router.
> When you plug the computer into the router, check in your support tab in the
> connection status, for "default gateway"... Open Internet Explorer, and type
> in the number sequence (IP address) you see there, including the periods.
> This'll take you to the configuration of the router. You may need to contact
> your DSL service provider for information about what you need to set.
> Normally (SBC in this case) you set the connection type to PPPoE, and enter
> your username and password.
> When you type in that IP address in your web browser, you are actually
> viewing a webpage on the router itself! This is where you can control
> everything the router does.
> -James G.
>
> "Mark" <(E-Mail Removed)> wrote in message
> news:49416F95-C9DC-49A9-A89E-(E-Mail Removed)...
> >I just got the MN-620 wireless kit. I have followed the instructions during
> > install. But when I connect the DSL router to the wireless base station
> > then
> > back to the cpu I cannot connect to the internet anymore.
> > No firewalls are on
> > Everything is pluged into what it should be, but I can't get passed this
> > issue.
> >
> > Help Please?
> >
> > My 'A' computer is running XP Home Edition Service Pack 2
> > My DSL Router is a Westell Model 6100
> >
> >
>
>
>