WIRELESS HELP YES I DID I AGAIN

SORRY I POSTED THIS AS A REPLY AT FIRST BUT HERE IT IS AGAIN.

I've just got a BINATONE WL1200 to connect my laptop to my NTL cable modem
and then
the web (just need wireless internet) but I can't get it to work it says I'm
connected and the lights flash but all I get is page can not be displayed
do I need to bye any think more to make it work or have I just got the wrong
thing or is it set up wrong?

John Arkley wrote:
> SORRY I POSTED THIS AS A REPLY AT FIRST BUT HERE IT IS AGAIN.
>
> I've just got a BINATONE WL1200 to connect my laptop to my NTL cable
> modem and then
> the web (just need wireless internet) but I can't get it to work it
> says I'm connected and the lights flash but all I get is page can not
> be displayed do I need to bye any think more to make it work or have
> I just got the wrong thing or is it set up wrong?

Reboot your cable modem, leaving the power off for one minute. See if
that helps.

Q

No still no luck is it something to do with the ip address?
I tried to change it, but it needs a user name and pass word I got it new
but don't no a password :-(
John
"Quaoar" <(E-Mail Removed)> wrote in message
newsvednQ912o0Yw9bdRVn-(E-Mail Removed)...
> John Arkley wrote:
> > SORRY I POSTED THIS AS A REPLY AT FIRST BUT HERE IT IS AGAIN.
> >
> > I've just got a BINATONE WL1200 to connect my laptop to my NTL cable
> > modem and then
> > the web (just need wireless internet) but I can't get it to work it
> > says I'm connected and the lights flash but all I get is page can not
> > be displayed do I need to bye any think more to make it work or have
> > I just got the wrong thing or is it set up wrong?
>
> Reboot your cable modem, leaving the power off for one minute. See if
> that helps.
>
> Q
>
>

"John Arkley" <(E-Mail Removed)> wrote in
news:HRI2c.70680$6Z.61892@newsfe1-win:

> Subject: WIRELESS HELP YES I DID I AGAIN
> From: "John Arkley" <(E-Mail Removed)>
> Newsgroups: alt.internet.wireless
>
> SORRY I POSTED THIS AS A REPLY AT FIRST BUT HERE IT IS AGAIN.
>
> I've just got a BINATONE WL1200 to connect my laptop to my
NTL
> cable modem and then
> the web (just need wireless internet) but I can't get it to
work
> it says I'm connected and the lights flash but all I get is
page
> can not be displayed do I need to bye any think more to make
it
> work or have I just got the wrong thing or is it set up
wrong?
>
>
>

Have you setup the correct gateway and DNS IP addresses?

No when I click the ip settings fixed ip address is checked if I click DHCP
Client I guess this is what I need it needs a user name/password I don't
have so I've Emailed Binatone. So am I on the right track?
John
"me" <(E-Mail Removed)> wrote in message
news:Xns94A588DAE70C4DSR54ew4ASE3ast5@216.196.97.1 31...
> "John Arkley" <(E-Mail Removed)> wrote in
> news:HRI2c.70680$6Z.61892@newsfe1-win:
>
> > Subject: WIRELESS HELP YES I DID I AGAIN
> > From: "John Arkley" <(E-Mail Removed)>
> > Newsgroups: alt.internet.wireless
> >
> > SORRY I POSTED THIS AS A REPLY AT FIRST BUT HERE IT IS AGAIN.
> >
> > I've just got a BINATONE WL1200 to connect my laptop to my
> NTL
> > cable modem and then
> > the web (just need wireless internet) but I can't get it to
> work
> > it says I'm connected and the lights flash but all I get is
> page
> > can not be displayed do I need to bye any think more to make
> it
> > work or have I just got the wrong thing or is it set up
> wrong?
> >
> >
> >
>
> Have you setup the correct gateway and DNS IP addresses?