Wireless connection lost WRT54G and WPC11 ver1 (broken code)

I have a problem when connected to a WRT54G ver 1.1 (1.42.3) with a Dell
laptop using a WPC11 ver 1.0, rescanning on the wireless side occurs every
60 seconds causing a disconnect with the router.



I have tested this WPC11 connected to a D-Link router and it works perfect.



I have tested this WPC11 connected to a Linksys WRT54G ver 1.0 (1.01.4) and
it works perfect. I upgraded the WRT54G ver 1.0 to 1.42.3 and now I have the
exact problem as with the WRT54G ver 1.1 (1.42.3). I backed the firmware
down to 1.01.4 via the interim step of 1.41.8 on the WRT54G ver 1.0 and the
problem is fixed.



2.00.8_US is also still broke.



I'd like to downgrade my WRT54G ver 1.1 but I read someplace the Flash in
the 1.0 is an AMD and in the 1.1 is an Intel. My question is can I downgrade
a WRT54G ver 1.1 to 1.01.4 or something in between 1.01.4 and 1.42.3, just
before Linksys broke the code? I'm paranoid to try it; I know you can lock a
flash if you put in code that is not formatted for the correct flash.



Obviously this is an interim step until Linksys fixes its code.



Thanks,

Rich

I have downloaded for my router also a wrt54 G new firmware which is tweaked
you can turn up the output than I ve got it here ftp://ftp.sveasoft.com/pub/
the version i use is called Firmware_Samadhi2_v2_2.00.8.6sv.bin

Works perfect here no more dropouts after I have put the output on max
everywhere around my house 54 mbps

Grtz Jeff from the Netherlands
"nntp" <(E-Mail Removed)> schreef in bericht
news:RfudnVprh9n9VJ_dRVn-(E-Mail Removed)...
> I have a problem when connected to a WRT54G ver 1.1 (1.42.3) with a Dell
> laptop using a WPC11 ver 1.0, rescanning on the wireless side occurs every
> 60 seconds causing a disconnect with the router.
>
>
>
> I have tested this WPC11 connected to a D-Link router and it works
perfect.
>
>
>
> I have tested this WPC11 connected to a Linksys WRT54G ver 1.0 (1.01.4)
and
> it works perfect. I upgraded the WRT54G ver 1.0 to 1.42.3 and now I have
the
> exact problem as with the WRT54G ver 1.1 (1.42.3). I backed the firmware
> down to 1.01.4 via the interim step of 1.41.8 on the WRT54G ver 1.0 and
the
> problem is fixed.
>
>
>
> 2.00.8_US is also still broke.
>
>
>
> I'd like to downgrade my WRT54G ver 1.1 but I read someplace the Flash in
> the 1.0 is an AMD and in the 1.1 is an Intel. My question is can I
downgrade
> a WRT54G ver 1.1 to 1.01.4 or something in between 1.01.4 and 1.42.3, just
> before Linksys broke the code? I'm paranoid to try it; I know you can lock
a
> flash if you put in code that is not formatted for the correct flash.
>
>
>
> Obviously this is an interim step until Linksys fixes its code.
>
>
>
> Thanks,
>
> Rich
>
>

Wow ....
This is great news
Has anyone else tried this
I tried the ping hack to up the signal but didnt see much change on net
stumbler and no change in lost connections.


"Jeff H" <(E-Mail Removed)> wrote in message
news:P4LMb.923$tK2.1871@amstwist00...
> I have downloaded for my router also a wrt54 G new firmware which is
tweaked
> you can turn up the output than I ve got it here
ftp://ftp.sveasoft.com/pub/
> the version i use is called Firmware_Samadhi2_v2_2.00.8.6sv.bin
>
> Works perfect here no more dropouts after I have put the output on max
> everywhere around my house 54 mbps
>
> Grtz Jeff from the Netherlands
> "nntp" <(E-Mail Removed)> schreef in bericht
> news:RfudnVprh9n9VJ_dRVn-(E-Mail Removed)...
> > I have a problem when connected to a WRT54G ver 1.1 (1.42.3) with a Dell
> > laptop using a WPC11 ver 1.0, rescanning on the wireless side occurs
every
> > 60 seconds causing a disconnect with the router.
> >
> >
> >
> > I have tested this WPC11 connected to a D-Link router and it works
> perfect.
> >
> >
> >
> > I have tested this WPC11 connected to a Linksys WRT54G ver 1.0 (1.01.4)
> and
> > it works perfect. I upgraded the WRT54G ver 1.0 to 1.42.3 and now I have
> the
> > exact problem as with the WRT54G ver 1.1 (1.42.3). I backed the firmware
> > down to 1.01.4 via the interim step of 1.41.8 on the WRT54G ver 1.0 and
> the
> > problem is fixed.
> >
> >
> >
> > 2.00.8_US is also still broke.
> >
> >
> >
> > I'd like to downgrade my WRT54G ver 1.1 but I read someplace the Flash
in
> > the 1.0 is an AMD and in the 1.1 is an Intel. My question is can I
> downgrade
> > a WRT54G ver 1.1 to 1.01.4 or something in between 1.01.4 and 1.42.3,
just
> > before Linksys broke the code? I'm paranoid to try it; I know you can
lock
> a
> > flash if you put in code that is not formatted for the correct flash.
> >
> >
> >
> > Obviously this is an interim step until Linksys fixes its code.
> >
> >
> >
> > Thanks,
> >
> > Rich
> >
> >
>
>

Hi Jeff

Are you using a version 2 WRT54G router with this firmware?

Also, do you know, or does anyone know why Turbo mode doesn't work with
this router in its stock form? Is that a function of the firmware, or is
it an actual hardware deal?

Thanks in advance...

Jeff H wrote:

>I have downloaded for my router also a wrt54 G new firmware which is tweaked
>you can turn up the output than I ve got it here ftp://ftp.sveasoft.com/pub/
>the version i use is called Firmware_Samadhi2_v2_2.00.8.6sv.bin
>
>Works perfect here no more dropouts after I have put the output on max
>everywhere around my house 54 mbps
>
>Grtz Jeff from the Netherlands
>"nntp" <(E-Mail Removed)> schreef in bericht
>news:RfudnVprh9n9VJ_dRVn-(E-Mail Removed)...
>
>
>>I have a problem when connected to a WRT54G ver 1.1 (1.42.3) with a Dell
>>laptop using a WPC11 ver 1.0, rescanning on the wireless side occurs every
>>60 seconds causing a disconnect with the router.
>>
>>
>>
>>I have tested this WPC11 connected to a D-Link router and it works
>>
>>
>perfect.
>
>
>>
>>I have tested this WPC11 connected to a Linksys WRT54G ver 1.0 (1.01.4)
>>
>>
>and
>
>
>>it works perfect. I upgraded the WRT54G ver 1.0 to 1.42.3 and now I have
>>
>>
>the
>
>
>>exact problem as with the WRT54G ver 1.1 (1.42.3). I backed the firmware
>>down to 1.01.4 via the interim step of 1.41.8 on the WRT54G ver 1.0 and
>>
>>
>the
>
>
>>problem is fixed.
>>
>>
>>
>>2.00.8_US is also still broke.
>>
>>
>>
>>I'd like to downgrade my WRT54G ver 1.1 but I read someplace the Flash in
>>the 1.0 is an AMD and in the 1.1 is an Intel. My question is can I
>>
>>
>downgrade
>
>
>>a WRT54G ver 1.1 to 1.01.4 or something in between 1.01.4 and 1.42.3, just
>>before Linksys broke the code? I'm paranoid to try it; I know you can lock
>>
>>
>a
>
>
>>flash if you put in code that is not formatted for the correct flash.
>>
>>
>>
>>Obviously this is an interim step until Linksys fixes its code.
>>
>>
>>
>>Thanks,
>>
>>Rich
>>
>>
>>
>>
>
>
>
>