Gaurang wrote:
> Hello David,
>
> Thanks for reply. Well, going ahead with this issue. I checked what you said
> in your mail. But I think there is some other issue,
> I am using WZC to manage my WLAN connection and this uses,
> Network Authentication : WPA-PSK
> Data Encryption : TKIP
>
> After getting your reply, I immediately checked, on other computer (On which
> WLAN is working fine) all security parameters. It is all the same. Even I
> disconnected WLAN completely from PC2 (Even from preferred network list) and
> gave fresh start. In WZC of PC2, I gave the password as like in PC 1
> (unencypted) and it was accepted by router.
>
> As you said most of the time you need to give Hexa password but, here I
> think system itself is converting to CHAR value to Hexa.
>
> A scenario I would like to mention here. During my initial attempt to fix
> this problem, I reset my router completely once. But even on the open netword
> (Un-secured) it was not able to connect and same problem was appearing.
>
> Kindly analyze the issue further. Let me know, what else info I could give
> you.
>
> Many Thanks, Gaurang
>
> "David Hettel" wrote:
>
>> My guess is you have a security problem. I don't know what kind of security
>> you are using, but look at the password, often you need top enter the hex
>> value and not the actual password. You are not meeting the security
>> requirements of the router, and the router is not giving out an IP address.
>> You may need to redo the security settings for your network. Be sure your
>> laptop supports the security of the router. This page may help
>> http://www.ezlan.net/Wireless_Security.html
>>
>> --
>> David Hettel
>>
>> Please post any reply as a follow-up message in the news group for everyone
>> to see. I'm sorry, but I don't answer questions addressed directly to me in
>> E-mail or news groups.
>>
>> Microsoft Most Valuable Professional Program
>> http://mvp.support.microsoft.com
>>
>> DISCLAIMER: This posting is provided "AS IS" with no warranty of any kind,
>> either expressed or implied, made in relation to the accuracy, reliability
>> or content of this post. The author shall not be liable for any direct,
>> indirect, incidental or consequential damages arising out of the use of, or
>> inability to use, information or opinions expressed in this post and confers
>> no rights.
>>
>>
>>
>> "Gaurang" <(E-Mail Removed)> wrote in message
>> news:7C5B3B08-EB7B-4A2E-B80D-(E-Mail Removed)...
>>> Hello There,
>>>
>>> Could you please help me here. I have WLAN connection which I was using on
>>> 2
>>> laptops since last 3 months. On one laptop I recently re-installed XP.
>>> Hardware and driver installtions are back in place properly. On Laptop 2 I
>>> am
>>> able to connect with WLAN perfectly but not from 1.
>>>
>>> LAN is working properly but WLAN says "Limied or no connectivity". On
>>> giving
>>> "repair" option, It takes much time and says "Following action could not
>>> be
>>> completed --> "Renewing your IP".
>>>
>>> When I am looking in STATUS--> SUPPORT --> Details then IP address is
>>> wrongly assigned to 169.254.182.243 and subnet mask to 255.255.0.0 and
>>> rest
>>> others are blank.
>>>
>>> WLAN is Broadcom 802.11 b/g
>>>
>>> I already tried ipconfig /release and ipconfig /renew commands
>>>
>>> but not fixed. I am just fade up of attemting all different ways but that
>>> 169.254.x.x is not at all moving away from there.
>>>
>>> Please help.
>>>
>>> Same connection I am able to connect by LAN.
The symptom of your problem is that the laptop is not obtaining an IP
address from the DHCP server in the router. Because the other laptop
does obtain an IP address, at least you know that the problem is not
caused by the DHCP server being turned off.
There are several possibilities for this issue, an improper encryption
key (as David suggested) being probably one of the more common.
Perhaps the radio in your laptop's wifi adapter is turned off. Can you
"view wireless networks" and see at least your router's SSID? If not,
look for a physical switch or read your laptop User Guide to find the
Fn+Fkey combination that turns the radio on and off.
It's possible, although not likely, that you have MAC filtering set in
addition to encryption and that this is causing the problem. I say this
is unlikely because the MAC address of your wifi adapter will not have
changed with the reinstall of XP. Thus, even if you have MAC filtering
enabled in the router, the MAC address of your wifi adapter should still
be on the "allow" list.
Make sure to temporarily disable all software firewalls, including
anti-virus applications with "internet worm protection."
If you can successfully connect to the router with an Ethernet cable,
you know that the issue is not something like a corrupted Winsock or
TCP/IP stack. Be aware that firewalls can be configured separately for
separate network adapters, so just because the LAN connection works OK
does not necessarily mean that there is not a firewall issue on the
wireless adapter.
If none of the above work, try MVP Hans Georg Michna's network trouble
shooter, which will help you pinpoint the problem in a methodical way --
if you answer all of the questions accurately:
http://winhlp.com/wxnet.htm
--
Lem -- MS-MVP - Networking
To the moon and back with 64 Kbits of RAM and 512 Kbits of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
Similar Threads
Linear Mode
