On Jul 22, 3:21*pm, "Bill Kearney" <wkearne...@hotmail.com> wrote:
> > I'm trying to make sense of the various differing views
>
> It's simple. *Generally, you want a router between your internal network and
> your internet connection. *This to act as a firewall between your network
> and the rest of the world. *And if you have more than one wired ethernet
> device you generally want a switch to handle the traffic. *If you want to
> add wireless devices to the network you need something listening for them..
> These 3 functions can generally be found in the typical small office/home
> office (soho) situation. *Devices like the Linksys WRT54G come to mind.
>
> If you already had a router and didn't want to change it you could add just
> a wireless access point (WAP). *Or if you wanted to provide coverage atthe
> far end of the house, you could pull wire to that area and set up just a
> WAP. *But even if you already have a router it may be convenient to replace
> it with one that has WiFi built into it.
>
> > So I understand from
> > this that it depends on which brand I buy as to what functionality I
> > will get.
>
> No, this is incorrect. *Much like buying a product from GM, you could get a
> truck, car or a van. *It's not about brand, it's about the model. *Some
> brands are better than others, but then some of the better brands have made
> crappy models.
>
> > Since I have yet to buy the laptop, I guess I should buy the
> > network kit from the same source (probably Dell,
>
> Much like the above auto example that may be a bad idea. *You'll just end up
> paying extra for something you could buy elsewhere yourself. *But checkand
> see, it's possible Dell is bundling someone else's WiFi router at a good
> price.
>
> > BTW, the connection is an Ethernet one, so I guess I can keep my (A?)DSL
> > modem.
>
> Quite probably. *Your next question should be directed to your ISP. *Ask
> them what the instructions are on rearranging your existing setup with one
> using a WiFi router. *Most support doing this. *The process is relatively
> straightforward. *You'll have to possess some info from the ISP regarding
> the type of connection (PPPoE, static, DHCP) and IP addresses for gateway
> and DNS. *Once you've got that it should be possible to put that info into
> your new router and be up and running WELL inside of an hour.
>
> -Bill Kearney
Hi Bill, thanks very much for spending the time to explain this to a
novice. I think I've got it now, ie the Linksys WRT54G device is a
wireless router, and that another device that could do the same job
would be for example the D-Link DIR-615
Wireless N Home Router (
http://tinyurl.com/jpwireless1). I understand
that my configuration would be that the wireless router would be
connected (a) to my ADSL modem, via the Ethernet cable, (b) to my
desktop, also via an Ethernet cable (or would that be a USB cable?),
and (c) to the laptop (which needs to have a WiFi adaptor card) via a
wireless link. Is that right?