Still having problems with my wireless when connected via VPN:
When I'm connected via Cisco VPN then the VPN is often diconnected. The
wireless is diconnected for a second and "Acquiring Network Adress" and that
is then leaving the wireless disconnected adterwards.
This seem to happen if other computer is also connected to the wireless (not
using VPN).
I didn't have this issue before install of latest driver from Dell for INTEL
PRO/Wireless 3945ABG or before installation of SP3.
I found and tried the following, but it didn't solve the issue:
"Click on your connection and click modify. Click on the transport tab. Make
sure all clients are using IP Sec over TCP. If it is IP Sec over UDP then one
connection will boot the other off."
"Robert L. (MS-MVP)" wrote:
> Thank you for the update.
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "kx_belg" <(E-Mail Removed)> wrote in message
> news:1963E203-1FE1-4D85-B8F7-(E-Mail Removed)...
> >I did install the latest driver from Dell for INTEL PRO/Wireless 3945ABG
> > Network Connection. If I now restart my PC it works immediatly! Thanks!!
> > Looks like I had a Dell driver before but it was overwritten by the XP
> > SP3.
> > (I had the same icon before installation of SP3 and after reinstalling the
> > Dell driver. Looks like the Dell driver works better on my Dell PC).
> >
> > "Robert L. (MS-MVP)" wrote:
> >
> >> I would upgrade the router firmware and NIC driver first. Or these posts
> >> may
> >> help.
> >>
> >> Wireless Problem after installing XP SP3
> >> WPC54C wireless doesn't work after installing XP sp3
> >> USB Wireless not working after XP SP3 download
> >> http://www.chicagotech.net/netforums...52f49e0704afd4
> >>
> >> --
> >> Bob Lin, MS-MVP, MCSE & CNE
> >> Networking, Internet, Routing, VPN Troubleshooting on
> >> http://www.ChicagoTech.net
> >> How to Setup Windows, Network, VPN & Remote Access on
> >> http://www.HowToNetworking.com
> >> "kx_belg" <(E-Mail Removed)> wrote in message
> >> news:ED558012-5A07-4B64-A567-(E-Mail Removed)...
> >> > After installing XP SP3 my wireless connection ony works when very
> >> > close
> >> > to
> >> > the router (eg 1 meter).
> >> >
> >> > This is part of EAPOL.LOG when connection fails:
> >> >
> >> > [2004] 00:11:34:890: WPA exchange not secured within 5 seconds in
> >> > AUTHENTICATED state
> >> > [2004] 00:11:34:890: EAPOL Failure: Fail Count = 3
> >> > [2004] 00:11:34:890: ElVerifyEAPOLKeyReceived: Calling
> >> > ElZeroConfigNotify:
> >> > failcount=3, prevauthtype=0, type=(3)
> >> > [2004] 00:11:34:890: ElVerifyEAPOLKeyReceived: RpcCmdInterface[12]
> >> > SUCCEEDed
> >> > [2004] 00:11:34:890: ElZeroConfigNotify: Handle=(5), failcount=(3),
> >> > lastauthtype=(0)
> >> > [2644] 00:11:34:890: ElMediaEventsHandler entered -- EventType=<6>
> >> > [2644] 00:11:34:890: ElMediaEventsHandler: Calling
> >> > ElMediaSenseEventFromWZC
> >> > [2644] 00:11:34:890: ElMediaSenseEventFromWZC: Entered
> >> > [2644] 00:11:34:890: ElMediaSenseEventFromWZCWorker: For interface GUID
> >> > ({73E8D9F1-46D9-45D7-A69D-9AF7CCA73A49})
> >> > [2644] 00:11:34:890: ElMediaSenseEventFromWZCWorker: Callback for sense
> >> > disconnect
> >> > [2004] 00:11:34:890: ElVerifyEAPOLKeyReceived: ElZeroConfigNotify
> >> > SUCCEEDed
> >> > -- type=(3)
> >> > [2004] 00:11:34:890: BLOCKING network due to failures: 47 72 61 75 77
> >> > 65
> >> > 6C
> >> > 73 20 57 69 46 69 00 00 00 |Grauwels WiFi...|
> >> > [2004] 00:11:34:890: ElVerifyEAPOLKeyReceived: Pushing into
> >> > disconnected
> >> > state: Fail count (3) > Max fail count (3)
> >> > [2004] 00:11:34:890: Current Mode is NOT WPA2. PreAuth disabled
> >> > ....
> >> >
> >> > When connection is ok (very close to the router)then same log contains:
> >> > [2988] 00:15:38:359: ElTimeoutCallbackRoutine entered
> >> > [2988] 00:15:38:359: EAPOL-Key for transmit key received within 5
> >> > seconds
> >> > in
> >> > AUTHENTICATED state
> >> > [2988] 00:15:38:359: Resetting the auth fail counter to 0, Old Value
> >> > was 0
> >> > [2988] 00:15:38:359: ElVerifyEAPOLKeyReceived: RpcCmdInterface[10]
> >> > SUCCEEDed
> >> > [2988] 00:15:38:359: ElZeroConfigNotify: Handle=(2), failcount=(0),
> >> > lastauthtype=(0)
> >> > [2988] 00:15:38:359: ElVerifyEAPOLKeyReceived: ElZeroConfigNotify
> >> > SUCCEEDed
> >> > -- type=(5)
> >> > [2988] 00:15:38:359: ElTimeoutCallbackRoutine completed
> >>
> >>
>
>
Similar Threads
Linear Mode
