Wireless/cable networking

Trying to connect two computers at home using a Linksys Broadband Router. I
connect the incoming eathernet cable to the internet plug in and use an
eathernet cable from plug in slot in Router to each computer. Nothing
happens. Cannot connect to the internet with either. Both computers connect
individually withoput the router, but would like to have them both connected.
What am I doing wrong ????

Sorry you haven't given us enough information. You might want to run
ipconfig in a dos window, and compare the results when connected both ways.
Or tell us more about what you have done. There is more to it than simply
plugging in the router, the router must be configured to your ISP.

--
David Hettel

Please post any reply as a follow-up message in the news group for everyone
to see. I'm sorry, but I don't answer questions addressed directly to me in
E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

DISCLAIMER: This posting is provided "AS IS" with no warranty of any kind,
either expressed or implied, made in relation to the accuracy, reliability
or content of this post. The author shall not be liable for any direct,
indirect, incidental or consequential damages arising out of the use of, or
inability to use, information or opinions expressed in this post and confers
no rights.


"Confused Ragnald" <Confused (E-Mail Removed)> wrote in
message news:C760038D-4278-43F5-A187-(E-Mail Removed)...
> Trying to connect two computers at home using a Linksys Broadband Router.
> I
> connect the incoming eathernet cable to the internet plug in and use an
> eathernet cable from plug in slot in Router to each computer. Nothing
> happens. Cannot connect to the internet with either. Both computers
> connect
> individually withoput the router, but would like to have them both
> connected.
> What am I doing wrong ????

Confused Ragnald <Confused (E-Mail Removed)> wrote:

> Trying to connect two computers at home using a Linksys Broadband Router. I
> connect the incoming eathernet cable to the internet plug in and use an
> eathernet cable from plug in slot in Router to each computer. Nothing
> happens. Cannot connect to the internet with either. Both computers connect
> individually withoput the router, but would like to have them both connected.
> What am I doing wrong ????

Check the cables, Woody

Hi
You need to configure the Router's WAN (Internet side) to be able to
authenticate (ID & PW), and log on
EarthLink and both computer can connect? You probably have DSL.
Read this page, http://www.ezlan.net/PPPOE.html
If you have Internet Cable service, http://www.ezlan.net/broadband.html
Jack (MVP-Networking).

"Confused Ragnald" <Confused (E-Mail Removed)> wrote in
message news:C760038D-4278-43F5-A187-(E-Mail Removed)...
> Trying to connect two computers at home using a Linksys Broadband Router.
> I
> connect the incoming eathernet cable to the internet plug in and use an
> eathernet cable from plug in slot in Router to each computer. Nothing
> happens. Cannot connect to the internet with either. Both computers
> connect
> individually withoput the router, but would like to have them both
> connected.
> What am I doing wrong ????