Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Wireless bridge - possible in my case?

Reply
Thread Tools Display Modes

Wireless bridge - possible in my case?

 
 
Benny Hest
Guest
Posts: n/a

 
      01-16-2006, 11:52 AM
I've got a TEW-310APB access point/bridge unit which I try to setup as a
bridge in my LAN environment and a Asus wl-500g-deluxe as the other part of
my wireless world...

The situation is this:

I've placed my TEW-310ABP in one end of my house, connected to the LAN
interface of my firewall. And I now wonder how to setup my access point so
that it can bridge LAN traffic on to another access point I have - an Asus
wl-500g-deluxe.
My TrendNET is configured as a Wireless Bridge (in which mode I've supplied
it with the MAC address of my Asus thingy) - without network success.
Secondly I've tried the "Multiple Bridge"-mode of the TrendNET. Same result.
The Asus unit is setup to WDS mode and the MAC address of my TrendNET is
entered which should be all needed for the Asus to connect to it. I notice
that the wireless activity-LED indicators of both access points flickers
synchronously as if they really are connected - and this it while my PC's
wireless client card is disconnected so I'm that does not cause this
somewhat good indication of success...

Can you help me out on this?

Regards,
Benny


 
Reply With Quote
 
 
 
 
Benny Hest
Guest
Posts: n/a

 
      01-16-2006, 10:04 PM
Is my problem that I need my TRENDnet to run in repeater mode? Which this
model cannot...

/Benny

"Benny Hest" <(E-Mail Removed)> skrev i en meddelelse
news:1GMyf.31$(E-Mail Removed)...
> I've got a TEW-310APB access point/bridge unit which I try to setup as a
> bridge in my LAN environment and a Asus wl-500g-deluxe as the other part
> of my wireless world...
>
> The situation is this:
>
> I've placed my TEW-310ABP in one end of my house, connected to the LAN
> interface of my firewall. And I now wonder how to setup my access point so
> that it can bridge LAN traffic on to another access point I have - an Asus
> wl-500g-deluxe.
> My TrendNET is configured as a Wireless Bridge (in which mode I've
> supplied
> it with the MAC address of my Asus thingy) - without network success.
> Secondly I've tried the "Multiple Bridge"-mode of the TrendNET. Same
> result.
> The Asus unit is setup to WDS mode and the MAC address of my TrendNET is
> entered which should be all needed for the Asus to connect to it. I notice
> that the wireless activity-LED indicators of both access points flickers
> synchronously as if they really are connected - and this it while my PC's
> wireless client card is disconnected so I'm that does not cause this
> somewhat good indication of success...
>
> Can you help me out on this?
>
> Regards,
> Benny
>



 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Opening Belkin wireless case... Wireless Internet 7 09-03-2006 11:44 PM
RFID Using Wireless Tutorial, RFID and Environmental Issues, Wal-Mart and RFID: A Case Study (April 2006.) jonbonmike@gmail.com Wireless Internet 0 06-11-2006 01:47 AM
Case Problem - WiMAX?: Wireless network for 15km suburban radius ZionIFL Wireless Internet 5 05-16-2005 06:01 AM
wireless network card case for 1 dollar m Wireless Internet 0 05-17-2004 04:53 PM
Using XP Ethernet Bridge Mode as Wireless Bridge DrewJ Wireless Internet 0 08-13-2003 10:35 PM



1 2 3 4 5 6 7 8 9 10 11