Wireless-B adaptor

Please help,
After I installed the Wireless-B Base Station on my
computer with Windows XP I installed Wireless_B Adaptor on
other computer with Windows 98 Second Edision.
I did not know what I've done wrong that the computer with
the adaptor after a few minutes turns the monitor of, the
computer still running. Restaring the computer I get the
following messages:
'Cannot find adevice file that may be needed to run
Windows or a Windows application.
The windows registry or SYSTEM.INI file refers file, but
the device file no longer exists.
If you deleted this file on purpose, try installing the
associated application using its unistall or setup program.
If you still want to use the application associated with
this device file, try reinstalling that application to
replace the missing file

vserver.exd

Press a key to continue."

I do not know too much about computers, I wanted to
wireless net work my 2 computers in order to use the
printer and scaner.
I would like to get step to step the procedure to fix the
problem. Please help!
Thank you!!

I would suggest you do as the error message says and reinstall the wireless networking utility software and the drivers for the
wireless network card from CD on the win 98 machine.

To prepare the machine properly you should uninstall the software from control panel first then remove the wireless adapter using
device manager and then restart the machine. Once restarted windows will re-discover the network adapter and start looking for
drivers for it. At that point you should have the CD in the drive and make sure windows searches it for drivers by checking that
box in the driver search panel.

Once you have the network card properly installed pop the CD out and back in again to launch the installer to connect the PC to the
gateway. and follow the prompts to install. When you get to the setup panel asking if you wish to share printers and files select
that option and it should work.

You will have two basic options for installing, using the setup floppy disk created when you installed the software on the base
station or manual configuration. The floppy disk makes thing easier as it has the name of the group that was assigned to the base
station so they end up in the same area in network neighborhood which is easier to find and also the printer and file sharing
options are saved there to configure your new client.


--
Dale Beaudette

Associate Expert
The Expert Zone
http://www.microsoft.com/windowsxp/e...ne/default.asp

"Harry" <(E-Mail Removed)> wrote in message news:0c3901c3db86$76f03460$(E-Mail Removed)...
> Please help,
> After I installed the Wireless-B Base Station on my
> computer with Windows XP I installed Wireless_B Adaptor on
> other computer with Windows 98 Second Edision.
> I did not know what I've done wrong that the computer with
> the adaptor after a few minutes turns the monitor of, the
> computer still running. Restaring the computer I get the
> following messages:
> 'Cannot find adevice file that may be needed to run
> Windows or a Windows application.
> The windows registry or SYSTEM.INI file refers file, but
> the device file no longer exists.
> If you deleted this file on purpose, try installing the
> associated application using its unistall or setup program.
> If you still want to use the application associated with
> this device file, try reinstalling that application to
> replace the missing file
>
> vserver.exd
>
> Press a key to continue."
>
> I do not know too much about computers, I wanted to
> wireless net work my 2 computers in order to use the
> printer and scaner.
> I would like to get step to step the procedure to fix the
> problem. Please help!
> Thank you!!