Wired Equivalent Protocol for MN 500

I have a MN 500 router and I would like to set it up so
only my can use the signals.
How can I do this?
Thanks.
Eduardo.

Change to something other than the default channel, give your SSID and
Workgroup unique names, use WEP and filter by MAC address of the computers
on your system.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Eduardo." <(E-Mail Removed)> wrote in message
news:4a8401c3e43f$cee6a340$(E-Mail Removed)...
> I have a MN 500 router and I would like to set it up so
> only my can use the signals.
> How can I do this?
> Thanks.
> Eduardo.

Thanks Chris.
Do you have a www where can tell me step by step this
process?

Thanks.
>-----Original Message-----
>Change to something other than the default channel, give
your SSID and
>Workgroup unique names, use WEP and filter by MAC
address of the computers
>on your system.
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"Eduardo." <(E-Mail Removed)> wrote
in message
>news:4a8401c3e43f$cee6a340$(E-Mail Removed)...
>> I have a MN 500 router and I would like to set it up so
>> only my can use the signals.
>> How can I do this?
>> Thanks.
>> Eduardo.
>
>
>.
>

See if this helps


http://support.microsoft.com/default...b;en-us;810955
http://support.microsoft.com/default...b;en-us;817463


--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Eduardo" <(E-Mail Removed)> wrote in message
news:4cda01c3e464$b22975f0$(E-Mail Removed)...
> Thanks Chris.
> Do you have a www where can tell me step by step this
> process?
>
> Thanks.
> >-----Original Message-----
> >Change to something other than the default channel, give
> your SSID and
> >Workgroup unique names, use WEP and filter by MAC
> address of the computers
> >on your system.
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"Eduardo." <(E-Mail Removed)> wrote
> in message
> >news:4a8401c3e43f$cee6a340$(E-Mail Removed)...
> >> I have a MN 500 router and I would like to set it up so
> >> only my can use the signals.
> >> How can I do this?
> >> Thanks.
> >> Eduardo.
> >
> >
> >.
> >