Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > Windows Xp Pro x64 Driver for Microfsoft Wireless USB Adapter MN-7

Reply
Thread Tools Display Modes

Windows Xp Pro x64 Driver for Microfsoft Wireless USB Adapter MN-7

 
 
Charles B
Guest
Posts: n/a

 
      08-25-2007, 05:36 PM
Does anyone know if subject Driver exists? If it does where can I find it? It
seems that even Microsoft cannot keep up with change. I am very satisfied
with the product but when I switched one of my computers to Xp x64 I find
that drivers are some time hard to come by.

Thank anyone.
 
Reply With Quote
 
 
 
 
Chris H
Guest
Posts: n/a

 
      08-25-2007, 05:47 PM
No, sorry, it doesn't exist. Microsoft ceased production of the MN-700
series router and adapters several years ago. Which device are you
attempting to use, and have you just plugged it in? If it is the router,
you don't need the software and should just be able to connect.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
http://forums.mobilepcworld.net
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Charles B" <Charles (E-Mail Removed)> wrote in message
news:E470CAF4-BE6B-49A5-B1D1-(E-Mail Removed)...
> Does anyone know if subject Driver exists? If it does where can I find it?
> It
> seems that even Microsoft cannot keep up with change. I am very satisfied
> with the product but when I switched one of my computers to Xp x64 I find
> that drivers are some time hard to come by.
>
> Thank anyone.


 
Reply With Quote
 
Charles B
Guest
Posts: n/a

 
      08-25-2007, 09:06 PM
I have a MN-710 adapter that I was using on one of my Xp computers and change
the OS to Windows Xp Pro x64 and found that I cannot load any of the network
software supplied with the MN-700 router and the adapter..If I knew which
chip that the MN-710 uses I might be able to find a driver elsewhere..I have
pluged the adapter in but the x64 system doesn't like it..Thanks

"Chris H" wrote:

> No, sorry, it doesn't exist. Microsoft ceased production of the MN-700
> series router and adapters several years ago. Which device are you
> attempting to use, and have you just plugged it in? If it is the router,
> you don't need the software and should just be able to connect.
> --
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> http://forums.mobilepcworld.net
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
> "Charles B" <Charles (E-Mail Removed)> wrote in message
> news:E470CAF4-BE6B-49A5-B1D1-(E-Mail Removed)...
> > Does anyone know if subject Driver exists? If it does where can I find it?
> > It
> > seems that even Microsoft cannot keep up with change. I am very satisfied
> > with the product but when I switched one of my computers to Xp x64 I find
> > that drivers are some time hard to come by.
> >
> > Thank anyone.

>

 
Reply With Quote
 
Chris H
Guest
Posts: n/a

 
      08-25-2007, 10:03 PM
You don't need the software for the router because you're addressing the
firmware on the router itself, and should be able to use the operating
system networking setup to access it. As to the MN-710, that went out of
production probably four years ago now and if the OS doesn't recognize it
automatically you're quite honestly out of luck. Microsoft quit updating
the firmware when they stopped production. Good little adapter, but there
will not be any support coming out for it.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
http://forums.mobilepcworld.net
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Charles B" <(E-Mail Removed)> wrote in message
news:CE3FD7D8-DAB9-4464-BB30-(E-Mail Removed)...
>I have a MN-710 adapter that I was using on one of my Xp computers and
>change
> the OS to Windows Xp Pro x64 and found that I cannot load any of the
> network
> software supplied with the MN-700 router and the adapter..If I knew which
> chip that the MN-710 uses I might be able to find a driver elsewhere..I
> have
> pluged the adapter in but the x64 system doesn't like it..Thanks
>
> "Chris H" wrote:
>
>> No, sorry, it doesn't exist. Microsoft ceased production of the MN-700
>> series router and adapters several years ago. Which device are you
>> attempting to use, and have you just plugged it in? If it is the router,
>> you don't need the software and should just be able to connect.
>> --
>> Chris H.
>> Microsoft Windows MVP/Tablet PC
>> Tablet Creations - http://nicecreations.us/
>> http://forums.mobilepcworld.net
>> Associate Expert
>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>> "Charles B" <Charles (E-Mail Removed)> wrote in message
>> news:E470CAF4-BE6B-49A5-B1D1-(E-Mail Removed)...
>> > Does anyone know if subject Driver exists? If it does where can I find
>> > it?
>> > It
>> > seems that even Microsoft cannot keep up with change. I am very
>> > satisfied
>> > with the product but when I switched one of my computers to Xp x64 I
>> > find
>> > that drivers are some time hard to come by.
>> >
>> > Thank anyone.

>>


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Driver for MS Adapter MN-710 on Windows Xp Pro x64 Edition platfor Charles B Wireless Networks 1 08-25-2007 07:47 PM
USB driver? (wireless usb adapter) =?Utf-8?B?YW5vbnltb3Vz?= Windows Networking 1 11-17-2004 11:16 PM
mn-730 wireless pci adapter driver Mike Broadband Hardware 0 07-16-2004 11:02 PM
Windows XP Driver for Linksys WCF12 Compactflash Adapter Mark Hildebrnad Wireless Internet 1 12-02-2003 10:44 PM
D-Link wireless adapter driver Bryan Windows Networking 9 09-15-2003 03:11 AM



1 2 3 4 5 6 7 8 9 10 11