Windows Server 2003 NAT - Port Forwarding

I set the forwarding rules for SSH (22/TCP). The RRAS service is
supposed to forward all 22/TCP traffic to 192.168.254.17. It does not.

I checked that there are no other server running on port 22 on the
server. I tried setting and unsetting the "IP Address Pool" - two
static IPs, so I set netmask to 255.255.255.255.

It just does not forward the port from the NAT interface to the
internal interface and IP.

I would appreciate help :P

-Jerome Baum

Use the netsh to check the NAT status or post the configuration result using netsh. this links may help,

Using Netsh command to troubleshoot NAT issues
http://www.chicagotech.net/tools/netsh1.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
<(E-Mail Removed)> wrote in message news:(E-Mail Removed) ps.com...
I set the forwarding rules for SSH (22/TCP). The RRAS service is
supposed to forward all 22/TCP traffic to 192.168.254.17. It does not.

I checked that there are no other server running on port 22 on the
server. I tried setting and unsetting the "IP Address Pool" - two
static IPs, so I set netmask to 255.255.255.255.

It just does not forward the port from the NAT interface to the
internal interface and IP.

I would appreciate help :P

-Jerome Baum