It seems to me the BBR1 blocks the access from BBR2. setup BBR1 as DMZ, can you ping it?
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"ITCOM" <(E-Mail Removed)> wrote in message news:eJk2G$(E-Mail Removed)...
we are setup routing lab for my testing the IP routing. The Lab information
as below.
2 x BB Router
1 x Switch Hub
2 x Laptop
BB Router 1 - WAN 1 : 192.168.66.10 / 255.255.255.0 , GW: 192.168.66.11
LAN1: 192.168.88.20 / 255.255.255.0 , ( Router device
IP)
LAPTOP: 192.168.88.200 / 255.255.255.0 , GW:
192.168.88.20
BB Router 2: wan 2: 192.168.66.11 / 255.255.255.0, GW: 192.168.66.10
lan2: 192.168.77.21 / 255.255.255.0, (router device IP)
LAPTOP: 192.168.77.200/ 255.255.255.0 , gw:
192.168.77.21
Network config :
- BBR1 and BBR2 WAN Port connect to Switch Hub
- BBR1 and BBR2 LAN Port connect to different Laptop
Question.
- Success BBR1 Laptop can Ping to BBR2 WAN IP , LAN IP , LATOP IP
- Success BBR2 Laptp can ping to BBR1 WAN IP
- CANNOT BBR2 laptop cannot to BBR1 LAN IP, LATOP IP.
** I want BBR1 success ping BBR2 WAN IP, LAN IP, LAPTOP IP
**I want BBR2 success ping BBR1 WAN IP, LAN IP, LAPTOP IP
*** I have try using route add , but no effect.
Pls advice the solution to solve out this case.
THX
ITITITIT
Similar Threads
Linear Mode
