Windows Logon problem

Hope somebody can help. I've just done a clean install of Win 98 to new hard
drive, setting up Client for MS Networks, TCP/IP etc. as it installed.

The network to my other machine works fine. Its just that as I boot up I get
the Windows logon box, then it goes away, but I have to log off and then on
again to get the network connection.

It's just a bit of a pain. The network client is set as the logon in Network
settings in Control Panel.

Thanks - Steve

Using REGEDIT, open up the following key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\
Network\Real Mode Net

and delete the value named "AutoLogon" if it exists.

Reboot the system and that should do it.

--
Richard G. Harper (MVP Win9x) (E-Mail Removed)
* PLEASE post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
Help US help YOU ... http://www.dts-l.org/goodpost.htm


"Steevee" <(E-Mail Removed)> wrote in message
news:lAWfb.9602$(E-Mail Removed)...
> Hope somebody can help. I've just done a clean install of Win 98 to new
hard
> drive, setting up Client for MS Networks, TCP/IP etc. as it installed.
>
> The network to my other machine works fine. Its just that as I boot up I
get
> the Windows logon box, then it goes away, but I have to log off and then
on
> again to get the network connection.
>
> It's just a bit of a pain. The network client is set as the logon in
Network
> settings in Control Panel.
>
> Thanks - Steve
>
>

Hi Richard. Under Real Mode Net I don't have AutoLogon. I've got:
(Default) Value not set
LoadRMDrivers 00 00 00 00
netcard ""
preferredredir "VREDIR"
transport ""

Does that give any clues?
Steve


"Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Using REGEDIT, open up the following key:
>
> HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\
> Network\Real Mode Net
>
> and delete the value named "AutoLogon" if it exists.
>
> Reboot the system and that should do it.
>
> --
> Richard G. Harper (MVP Win9x) (E-Mail Removed)
> * PLEASE post all messages and replies to the newsgroup so all may
> * benefit from the discussion. Private mail is usually not replied to.
> Help US help YOU ... http://www.dts-l.org/goodpost.htm
>
>
> "Steevee" <(E-Mail Removed)> wrote in message
> news:lAWfb.9602$(E-Mail Removed)...
> > Hope somebody can help. I've just done a clean install of Win 98 to new
> hard
> > drive, setting up Client for MS Networks, TCP/IP etc. as it installed.
> >
> > The network to my other machine works fine. Its just that as I boot up I
> get
> > the Windows logon box, then it goes away, but I have to log off and then
> on
> > again to get the network connection.
> >
> > It's just a bit of a pain. The network client is set as the logon in
> Network
> > settings in Control Panel.
> >
> > Thanks - Steve
> >
> >
>
>

Not to me, but maybe someone else will have a thought.

--
Richard G. Harper (MVP Win9x) (E-Mail Removed)
* PLEASE post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
Help US help YOU ... http://www.dts-l.org/goodpost.htm


"Steevee" <(E-Mail Removed)> wrote in message
news:JoZfb.9796$(E-Mail Removed)...
> Hi Richard. Under Real Mode Net I don't have AutoLogon. I've got:
> (Default) Value not set
> LoadRMDrivers 00 00 00 00
> netcard ""
> preferredredir "VREDIR"
> transport ""
>
> Does that give any clues?
> Steve
>
>
> "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Using REGEDIT, open up the following key:
> >
> > HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\
> > Network\Real Mode Net
> >
> > and delete the value named "AutoLogon" if it exists.
> >
> > Reboot the system and that should do it.
> >
> > --
> > Richard G. Harper (MVP Win9x) (E-Mail Removed)
> > * PLEASE post all messages and replies to the newsgroup so all may
> > * benefit from the discussion. Private mail is usually not replied to.
> > Help US help YOU ... http://www.dts-l.org/goodpost.htm
> >
> >
> > "Steevee" <(E-Mail Removed)> wrote in message
> > news:lAWfb.9602$(E-Mail Removed)...
> > > Hope somebody can help. I've just done a clean install of Win 98 to
new
> > hard
> > > drive, setting up Client for MS Networks, TCP/IP etc. as it installed.
> > >
> > > The network to my other machine works fine. Its just that as I boot up
I
> > get
> > > the Windows logon box, then it goes away, but I have to log off and
then
> > on
> > > again to get the network connection.
> > >
> > > It's just a bit of a pain. The network client is set as the logon in
> > Network
> > > settings in Control Panel.
> > >
> > > Thanks - Steve
> > >
> > >
> >
> >
>
>

Eureka!! I stumbled across the answer on the MS Knowledgebase. Its 260696
titled Desktop May Appear Before You Can Log On.

Cause: This issue can be caused by installing the CeQuadrat software that is
included with the Phillips CD-Writer software.

To resolve this issue, delete the Show Splash value from the following
registry key:
HKEY_LOCAL_MACHINE\Software\CeQuadrat\C2UDFFS
Which I have done and problem is solved. Now boots straight through to
Network Logon. Hope this may be useful to any Philips CD owners.

Steve


"Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Not to me, but maybe someone else will have a thought.

I'm glad you were able to find it, because I don't think I ever would have.
:-)

--
Richard G. Harper (MVP Win9x) (E-Mail Removed)
* PLEASE post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
Help US help YOU ... http://www.dts-l.org/goodpost.htm


"Steevee" <(E-Mail Removed)> wrote in message
news:lP1gb.10168$(E-Mail Removed)...
> Eureka!! I stumbled across the answer on the MS Knowledgebase. Its 260696
> titled Desktop May Appear Before You Can Log On.
>
> Cause: This issue can be caused by installing the CeQuadrat software that
is
> included with the Phillips CD-Writer software.
>
> To resolve this issue, delete the Show Splash value from the following
> registry key:
> HKEY_LOCAL_MACHINE\Software\CeQuadrat\C2UDFFS
> Which I have done and problem is solved. Now boots straight through to
> Network Logon. Hope this may be useful to any Philips CD owners.
>
> Steve
>
>
> "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
> > Not to me, but maybe someone else will have a thought.
>
>

Just hope it might help somebody else.....

Steve

"Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> I'm glad you were able to find it, because I don't think I ever would
have.
> :-)
>
> --
> Richard G. Harper (MVP Win9x) (E-Mail Removed)
> * PLEASE post all messages and replies to the newsgroup so all may
> * benefit from the discussion. Private mail is usually not replied to.
> Help US help YOU ... http://www.dts-l.org/goodpost.htm
>
>
> "Steevee" <(E-Mail Removed)> wrote in message
> news:lP1gb.10168$(E-Mail Removed)...
> > Eureka!! I stumbled across the answer on the MS Knowledgebase. Its
260696
> > titled Desktop May Appear Before You Can Log On.
> >
> > Cause: This issue can be caused by installing the CeQuadrat software
that
> is
> > included with the Phillips CD-Writer software.
> >
> > To resolve this issue, delete the Show Splash value from the following
> > registry key:
> > HKEY_LOCAL_MACHINE\Software\CeQuadrat\C2UDFFS
> > Which I have done and problem is solved. Now boots straight through to
> > Network Logon. Hope this may be useful to any Philips CD owners.
> >
> > Steve
> >
> >
> > "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> > news:%(E-Mail Removed)...
> > > Not to me, but maybe someone else will have a thought.
> >
> >
>
>

On another related point, is it possible to just get rid of having to log on
to the network, so that I can just start the machine and walk away and it
logs on automatically?

"Steevee" <(E-Mail Removed)> wrote in message
news:b5agb.10298$(E-Mail Removed)...
> Just hope it might help somebody else.....
>
> Steve
>
> "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
> > I'm glad you were able to find it, because I don't think I ever would
> have.
> > :-)
> >
> > --
> > Richard G. Harper (MVP Win9x) (E-Mail Removed)
> > * PLEASE post all messages and replies to the newsgroup so all may
> > * benefit from the discussion. Private mail is usually not replied to.
> > Help US help YOU ... http://www.dts-l.org/goodpost.htm
> >
> >
> > "Steevee" <(E-Mail Removed)> wrote in message
> > news:lP1gb.10168$(E-Mail Removed)...
> > > Eureka!! I stumbled across the answer on the MS Knowledgebase. Its
> 260696
> > > titled Desktop May Appear Before You Can Log On.
> > >
> > > Cause: This issue can be caused by installing the CeQuadrat software
> that
> > is
> > > included with the Phillips CD-Writer software.
> > >
> > > To resolve this issue, delete the Show Splash value from the following
> > > registry key:
> > > HKEY_LOCAL_MACHINE\Software\CeQuadrat\C2UDFFS
> > > Which I have done and problem is solved. Now boots straight through to
> > > Network Logon. Hope this may be useful to any Philips CD owners.
> > >
> > > Steve
> > >
> > >
> > > "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> > > news:%(E-Mail Removed)...
> > > > Not to me, but maybe someone else will have a thought.
> > >
> > >
> >
> >
>
>

Yep.

http://support.microsoft.com/default...b;en-us;152104

--
Richard G. Harper (MVP Win9x) (E-Mail Removed)
* PLEASE post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
Help US help YOU ... http://www.dts-l.org/goodpost.htm


"Steevee" <(E-Mail Removed)> wrote in message
news:Lkegb.10475$(E-Mail Removed)...
> On another related point, is it possible to just get rid of having to log
on
> to the network, so that I can just start the machine and walk away and it
> logs on automatically?
>
> "Steevee" <(E-Mail Removed)> wrote in message
> news:b5agb.10298$(E-Mail Removed)...
> > Just hope it might help somebody else.....
> >
> > Steve
> >
> > "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> > news:%(E-Mail Removed)...
> > > I'm glad you were able to find it, because I don't think I ever would
> > have.
> > > :-)
> > >
> > > --
> > > Richard G. Harper (MVP Win9x) (E-Mail Removed)
> > > * PLEASE post all messages and replies to the newsgroup so all may
> > > * benefit from the discussion. Private mail is usually not replied
to.
> > > Help US help YOU ... http://www.dts-l.org/goodpost.htm
> > >
> > >
> > > "Steevee" <(E-Mail Removed)> wrote in message
> > > news:lP1gb.10168$(E-Mail Removed)...
> > > > Eureka!! I stumbled across the answer on the MS Knowledgebase. Its
> > 260696
> > > > titled Desktop May Appear Before You Can Log On.
> > > >
> > > > Cause: This issue can be caused by installing the CeQuadrat software
> > that
> > > is
> > > > included with the Phillips CD-Writer software.
> > > >
> > > > To resolve this issue, delete the Show Splash value from the
following
> > > > registry key:
> > > > HKEY_LOCAL_MACHINE\Software\CeQuadrat\C2UDFFS
> > > > Which I have done and problem is solved. Now boots straight through
to
> > > > Network Logon. Hope this may be useful to any Philips CD owners.
> > > >
> > > > Steve
> > > >
> > > >
> > > > "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in
message
> > > > news:%(E-Mail Removed)...
> > > > > Not to me, but maybe someone else will have a thought.
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Thanks Richard. Before I mess around do you know if that applies to the
Network Logon as well as the Windows Logon, or am I being daft?

Steve

"Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Yep.
>
> http://support.microsoft.com/default...b;en-us;152104
>
>
> "Steevee" <(E-Mail Removed)> wrote in message
> news:Lkegb.10475$(E-Mail Removed)...
> > On another related point, is it possible to just get rid of having to
log
> on
> > to the network, so that I can just start the machine and walk away and
it
> > logs on automatically?
> >
> > "Steevee" <(E-Mail Removed)> wrote in message
> > news:b5agb.10298$(E-Mail Removed)...
> > > Just hope it might help somebody else.....
> > >
> > > Steve
> > >
> > > "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in message
> > > news:%(E-Mail Removed)...
> > > > I'm glad you were able to find it, because I don't think I ever
would
> > > have.
> > > > :-)
> > > >
> > > > --
> > > > Richard G. Harper (MVP Win9x) (E-Mail Removed)
> > > > * PLEASE post all messages and replies to the newsgroup so all may
> > > > * benefit from the discussion. Private mail is usually not replied
> to.
> > > > Help US help YOU ... http://www.dts-l.org/goodpost.htm
> > > >
> > > >
> > > > "Steevee" <(E-Mail Removed)> wrote in message
> > > > news:lP1gb.10168$(E-Mail Removed)...
> > > > > Eureka!! I stumbled across the answer on the MS Knowledgebase.
Its
> > > 260696
> > > > > titled Desktop May Appear Before You Can Log On.
> > > > >
> > > > > Cause: This issue can be caused by installing the CeQuadrat
software
> > > that
> > > > is
> > > > > included with the Phillips CD-Writer software.
> > > > >
> > > > > To resolve this issue, delete the Show Splash value from the
> following
> > > > > registry key:
> > > > > HKEY_LOCAL_MACHINE\Software\CeQuadrat\C2UDFFS
> > > > > Which I have done and problem is solved. Now boots straight
through
> to
> > > > > Network Logon. Hope this may be useful to any Philips CD owners.
> > > > >
> > > > > Steve
> > > > >
> > > > >
> > > > > "Richard G. Harper [MVP Win9x]" <(E-Mail Removed)> wrote in
> message
> > > > > news:%(E-Mail Removed)...
> > > > > > Not to me, but maybe someone else will have a thought.
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>