Hi
If you cannot connect to the Router, it means that your interface shows the
presence of the signal but you do not have a real Network connection between
the computer and the Router.
Unfortunately, Win98 poses a logistic problem. Since Win98 does not have
Wireless management capabilities you must use the utility that comes with
the Wireless cards and these utilities are propriety designed by the Card’s
manufacturer so it is impossible to give a focused answer.
These pages are geared toward Win XP interface but you might be able to
extrapolate the principle and may be would find what is wrong.
Wireless Basic Configuration -
http://www.ezlan.net/Wireless_Config.html
Wireless Security -
http://www.ezlan.net/Wireless_Security.html
Jack (MVP-Networking).
"addy" <(E-Mail Removed)> wrote in message
news:969C571A-1431-45EB-B98D-(E-Mail Removed)...
>I am running a laptop on win 98. I recently purchased a micronet wireless
>lan
> usb adapter. I installed the software and this seems to be running ok, it
> shows 60% strength and has accepte my network password etc. However when
> i
> try o connect to the internet with internet explorer it always fails. I
> have
> noticed that sometimes the status flicks between not associated and
> checking
> evey few seconds but always comes back with a good signal. I also tried
> to
> connect to the router to check the settings but it wo't even do this.
>
> I would be so happy if someone could explin what I should do
> --
> kind regards
>
> adhide
Similar Threads
Linear Mode
