Win2K3 RAS requires 2 network interfaces?

I'm just about wrapping up a migration from W2K/Exch2K to W2K3/Exch2K3 and
went to configure RAS/VPN as I'm finishing up and find that I can't do this
on Win2K3 unless I have two network interfaces, or so the wizard tells me. I
also tried to set this up directly in the Routing and Remote Access applet
with the same message. In Win2K, I have it working just fine with a single
NIC. Is there NO way to set up RAS in W2K3 with a single NIC? Thanks for any
pointers. -- tom c

You should be able to setup VPN using one NIC. this link may help,

VPN Setup
How to setup VPN on w2k server with one NIC How to use PPTP through a Cisco PIX
Incoming Connection or RRAS Logon script with VPN Manage VPN connections ....
www.chicagotech.net/vpnsetup.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Tom C." <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
I'm just about wrapping up a migration from W2K/Exch2K to W2K3/Exch2K3 and
went to configure RAS/VPN as I'm finishing up and find that I can't do this
on Win2K3 unless I have two network interfaces, or so the wizard tells me. I
also tried to set this up directly in the Routing and Remote Access applet
with the same message. In Win2K, I have it working just fine with a single
NIC. Is there NO way to set up RAS in W2K3 with a single NIC? Thanks for any
pointers. -- tom c

Use the 'Custom configuration' option in the wizard and select 'VPN' in the
next screen

--
Thanks,
Janani
---------------------------------------------------------------------------
"This posting is provided "AS IS" with no warranties, and confers no
rights."

"Tom C." <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I'm just about wrapping up a migration from W2K/Exch2K to W2K3/Exch2K3 and
> went to configure RAS/VPN as I'm finishing up and find that I can't do
> this on Win2K3 unless I have two network interfaces, or so the wizard
> tells me. I also tried to set this up directly in the Routing and Remote
> Access applet with the same message. In Win2K, I have it working just fine
> with a single NIC. Is there NO way to set up RAS in W2K3 with a single
> NIC? Thanks for any pointers. -- tom c
>

OK, I see you have to choose to configure manually and then muddle your way
through. Thanks!

Thank you for the update.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Tom C." <(E-Mail Removed)> wrote in message news:%(E-Mail Removed)...
OK, I see you have to choose to configure manually and then muddle your way
through. Thanks!