understand what you are all saying, it makes sense, but I must ask a few
questions.
The subnet are currenty linked via VNP, we have a CISCO 800 at group
office and netgrears down at each branch.
Then I must ask, when it comes to DHCP, what is a user defined class, and
what on earth is it used for.
Secondly, the NETSH commande, I assume it can be done from W2003 Server,
and what syntax am I looking for or what should I be searching the internet
for to get the syntax?
Thanx for all your help so far.
"Andrei Ungureanu [MVP]" wrote:
> yeap, Bill is right. You'll need a DHCP relay for each subnet. (most routers
> can do that; if not, even a Win XP Pro can be configured to do that from
> NETSH)
>
>
> --
> Regards,
> Andrei Ungureanu
> www.eventid.net
> Test our new EventReader!
> http://www.altairtech.ca/eventreader...lt2.asp?ref=au
>
> "Bill Grant" <not.available@online> wrote in message
> news:e%(E-Mail Removed)...
> > How are these subnets linked together? DHCP requests are broadcasts.
> > You can usually configure your routers to relay these requests so that
> > they can reach a DHCP server on a different segment. The address of the
> > router interface which received the original broadcast determines which
> > scope is used. For example if the machine broadcasts a request and that
> > request is received on interface 192.168.0.x of the router, the machine
> > will receive an offer of 192.168.0.n .
> >
> > Vexander wrote:
> >> Unfortunately that is the thing. The only way the these "networks"
> >> are differentiated is by location and statically assigne IP
> >> addresses. There are no DC's for the other three networks. I know
> >> it is screwed up, but that unfortunatley is what I have inherited.
> >>
> >> "Andrei Ungureanu [MVP]" wrote:
> >>
> >>> the DHCP server will see from what network the request is coming
> >>> (from a special field in the DHCP request) and will give the IP
> >>> address according to that.
> >>>
> >>> --
> >>> Regards,
> >>> Andrei Ungureanu
> >>> www.eventid.net
> >>> Test our new EventReader!
> >>> http://www.altairtech.ca/eventreader...lt2.asp?ref=au
> >>>
> >>> "Vexander" <(E-Mail Removed)> wrote in message
> >>> news:BC8F1DA8-6A40-4B75-AD87-(E-Mail Removed)...
> >>>> I have taken over a mess at my new job and I aslowly trying to work
> >>>> my way through the carp to get to a better solution. I have just
> >>>> set up a new DHCP
> >>>> server, but the thing is now, this one DHCP server has to assing IP
> >>>> address
> >>>> to 4 networks.
> >>>>
> >>>> 192.168.0.
> >>>> 192.168.2.
> >>>> 192.168.3.
> >>>> 192.168.4.
> >>>>
> >>>> each with its own gateway
> >>>>
> >>>> Setting up the scopes and all that is done, but now how do I ensure
> >>>> that each PC get that IP address that it is supposed to. I am
> >>>> assuming that I am
> >>>> supposed to use a class, but how do I assing a class to a scope,
> >>>> and when I
> >>>> create a use defined class, what BINARY and ACSI value should I use.
> >>>>
> >>>> Thanx
> >
> >
>
>
>
Similar Threads
Linear Mode
