wgr614v7 router and dm111 adsl2+ modem both netgear

Dear All
I have the above gear, and while I can connect to the internet via the
adsl2+ modem when I try via the router I can't. I have read that the
adsl2+ modem I am using doesn't support 'NAT'. What I need to do is set
the router as DHCP and disable the modems DHCP (by selecting the full
brdige rfc option) comments and suggestions wellcome


Neil Morris

Neil Morris wrote:
> Dear All
> I have the above gear, and while I can connect to the internet via the
> adsl2+ modem when I try via the router I can't. I have read that the
> adsl2+ modem I am using doesn't support 'NAT'. What I need to do is set
> the router as DHCP and disable the modems DHCP (by selecting the full
> brdige rfc option) comments and suggestions wellcome
>
>
> Neil Morris
Looking at the details of both products what i think you require to do
is set the router to be both a DHCP server as well as set the router to
use NAT
the router should then assign both the pc's connected and the modem with
appropriate ip address's
as far as the modem is concerned it will only see the address of the
router believing it to be connected to a single pc
the router should then forward any data received to the pc that requested it
Alternatively you could sell both of those and purchase a router with a
built in ads2+ modem