WGPS606 Bridge Problem

I have my network setup as follows:

Ethernet Cable Modem (external IP address) connected to my Broadband
Router.

External IP address of Broadband Router 81.X.X.X Internal Adrress is
192.168.1.x with DHCP server set to distribute this range.

I have a 3Com office connect Wireless AP connected to this with Static
IP address of 192.168.1.100

I have My Netgear WGPS606 setup and connected to the wireless AP with
IP address 192.168.1.102

I have 2 printers a Brother HL 2030 and an epson r300 connected.

If i connect any computer to my network wireless it gets allocated an
IP address and if i connect to my ports on the broadband router it gets
allocated an IP address.

i can also print from all PCS connected upstairs and wireless

The problem i have is if i connect to the ports on the WGPS606 i can
not get an ip address, It is as if the wireless Bridge is not working
correctly

My router and Broadband connection is upstairs and i am trying to
create a bridge to downstairs so that my PC's downstairs can connect and
browse the internet, My DHCP Server Is upstairs

Maybe someone has had this trouble and fixed it


Regards


Steve

PS i also have another problem with a different setup so maybe you
could look at that thread too


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=29078
http://www.wirelessforums.org