Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > WEP settings Problem

Reply
Thread Tools Display Modes

WEP settings Problem

 
 
Bob Alston
Guest
Posts: n/a

 
      10-01-2004, 01:45 AM
My son had an interesting problem with his wireless network. He has a
Linksys BEFW11S4 802.11b router/AP and a Gateway laptop with built-in
wireless card. Initially his AP installation and use went pretty well. He
added WEP security and it worked reliably.

Something happened and it quit working. But the card still reported being
"connected" and a strong signal. I helped him get connected initially to
the cable modem direct, then to the router hard wired. Did some testing on
my end and could duplicate the symptoms with a bogus wep code on another
laptop. He tried re-entering the wep code on both AP and laptop. No joy.
So he changed the SSID on his AP, went to his laptop which detected the
"new" AP and requested he enter the WEP code. He did - same code - and it
connected and now works reliably again.

Any ideas of what happened???

--
Bob Alston

bobalston9 AT aol DOT com


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.771 / Virus Database: 518 - Release Date: 9/28/2004


 
Reply With Quote
 
 
 
 
Jerry Benge
Guest
Posts: n/a

 
      10-01-2004, 03:05 AM
That happens to me, the ip adress changes for some reason. What I have done
is go to the dhcp tab in the config in the router and delete the offending
ip address, then turn off the computer and then start it back up. I've had
it go back to 192.168.bla .bla or whatever local ip addres pool.
"Bob Alston" <(E-Mail Removed)> wrote in message
news:QE27d.4037$uY3.2883@fed1read03...
> My son had an interesting problem with his wireless network. He has a
> Linksys BEFW11S4 802.11b router/AP and a Gateway laptop with built-in
> wireless card. Initially his AP installation and use went pretty well.
> He added WEP security and it worked reliably.
>
> Something happened and it quit working. But the card still reported being
> "connected" and a strong signal. I helped him get connected initially to
> the cable modem direct, then to the router hard wired. Did some testing
> on my end and could duplicate the symptoms with a bogus wep code on
> another laptop. He tried re-entering the wep code on both AP and laptop.
> No joy. So he changed the SSID on his AP, went to his laptop which
> detected the "new" AP and requested he enter the WEP code. He did - same
> code - and it connected and now works reliably again.
>
> Any ideas of what happened???
>
> --
> Bob Alston
>
> bobalston9 AT aol DOT com
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.771 / Virus Database: 518 - Release Date: 9/28/2004
>



 
Reply With Quote
 
Phuoc
Guest
Posts: n/a

 
      10-01-2004, 07:22 AM
Kind of similar thing happened to me, my wireless network WinSE and XP was
working (drive sharing) well without internet. After I connected my ADSL
modem recently drive sharing (workgroup) failed, but internet was working.
I didn't suspect anthing could be missing because it was fine before,
until I read something about XP network wizard. I must have started it
when I was frustrated with setting up my modem. Somehow the wizard managed
to change something on the other computer WinSE.
Now it's working after I added IPX/SPX protocol. Was it removed? otherwise
how did it work before?

Phuoc Can HUA

On Thu, 30 Sep 2004 20:45:19 -0500, Bob Alston <(E-Mail Removed)>
wrote:

> My son had an interesting problem with his wireless network. He has a
> Linksys BEFW11S4 802.11b router/AP and a Gateway laptop with built-in
> wireless card. Initially his AP installation and use went pretty well.
> He
> added WEP security and it worked reliably.
>
> Something happened and it quit working. But the card still reported
> being
> "connected" and a strong signal. I helped him get connected initially to
> the cable modem direct, then to the router hard wired. Did some testing
> on
> my end and could duplicate the symptoms with a bogus wep code on another
> laptop. He tried re-entering the wep code on both AP and laptop. No
> joy.
> So he changed the SSID on his AP, went to his laptop which detected the
> "new" AP and requested he enter the WEP code. He did - same code - and
> it
> connected and now works reliably again.
>
> Any ideas of what happened???
>




--
_/\__/\__/\__/\__/\__/\_
www.huaonline.com
My Homepage is my Castle
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
WHR-HP-G54 DNS settings problem NotMe Wireless Internet 3 05-21-2008 12:31 AM
Wireless settings problem mike24 Wireless Internet 0 10-12-2007 12:31 AM
Problem with saving settings to MN-700 Andrej Radinger Broadband Hardware 2 03-29-2005 09:42 PM
xp documents and settings problem? CS Home Networking 6 04-21-2004 11:11 AM
Docs and Settings Problem CS Home Networking 2 04-20-2004 10:17 PM



1 2 3 4 5 6 7 8 9 10 11