WAP11 2.6 and WET11 help

My brother-in-law and I are trying to set up a wireless network. We
have a wap11 ver 2.6 on one end and a wet11 on the other. We each
have 2.4GHz 15dBi directional panel antenna connected using lmr400
wire. Is there someway to know if we have an signal strength? We have
line of sight and the distance between the two points is about 1-1/2
miles. We're kinda stuck at this point! Need advise.

Ryan

Download netstumbler, it will show you what is being received. You need to
use this with a wlan card in your PC/Laptop connected to one of the antenna



"Ryan" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> My brother-in-law and I are trying to set up a wireless network. We
> have a wap11 ver 2.6 on one end and a wet11 on the other. We each
> have 2.4GHz 15dBi directional panel antenna connected using lmr400
> wire. Is there someway to know if we have an signal strength? We have
> line of sight and the distance between the two points is about 1-1/2
> miles. We're kinda stuck at this point! Need advise.
>
> Ryan