W2k3 RRAS wants 2 NICs?

Tried to install RRAS on a W2k3 member server in a W2k AD domain but got
warning box saying for "Standard VPN server config at least 2 network
interfaces need to be installed." I'm just trying to set up another VPN RAS
server for our network, no site to site. On W2k it works just fine with 1
NIC. What am I missing here? Thanks

Try just setting it up as a remote access server. This will set up the
miniports for VPN.

Brian wrote:
> Tried to install RRAS on a W2k3 member server in a W2k AD domain but
> got warning box saying for "Standard VPN server config at least 2
> network interfaces need to be installed." I'm just trying to set up
> another VPN RAS server for our network, no site to site. On W2k it
> works just fine with 1 NIC. What am I missing here? Thanks

That is what I'm try to do set up RAS for VPN. I was told in another fourm
to try the last selection Custom Config instead of the first selection in
the Wizard, set up VPN and it may work, so I'm going to try that.
"Bill Grant" <not.available@online> wrote in message
news:(E-Mail Removed)...
> Try just setting it up as a remote access server. This will set up the
> miniports for VPN.
>
> Brian wrote:
> > Tried to install RRAS on a W2k3 member server in a W2k AD domain but
> > got warning box saying for "Standard VPN server config at least 2
> > network interfaces need to be installed." I'm just trying to set up
> > another VPN RAS server for our network, no site to site. On W2k it
> > works just fine with 1 NIC. What am I missing here? Thanks
>
>

If you only have one NIC in the server, you cannot use the standard Remote
Access wizard. Instead select Custom configuration, click Next, then select
VPN. If you have SP1, you must disable the Windows Firewall service before
running the wizard.

Doug Sherman
MCSE, MCSA, MCP+I, MVP

"Brian" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> That is what I'm try to do set up RAS for VPN. I was told in another
fourm
> to try the last selection Custom Config instead of the first selection in
> the Wizard, set up VPN and it may work, so I'm going to try that.
> "Bill Grant" <not.available@online> wrote in message
> news:(E-Mail Removed)...
> > Try just setting it up as a remote access server. This will set up
the
> > miniports for VPN.
> >
> > Brian wrote:
> > > Tried to install RRAS on a W2k3 member server in a W2k AD domain but
> > > got warning box saying for "Standard VPN server config at least 2
> > > network interfaces need to be installed." I'm just trying to set up
> > > another VPN RAS server for our network, no site to site. On W2k it
> > > works just fine with 1 NIC. What am I missing here? Thanks
> >
> >
>
>