W2k3 IAS radius wireless error message, help needed

I'm setting up W2k3 IAS Radius server which for my wireless client to login
and authenticate following this website

http://www.windowsnetworking.com/kba...1xclients.html

which seems pretty useful but unfortunately I could not get it work.My A.D
and IAS radius sit on the same server.
192.168.0.99 = A.D & IAS Server
192.168.0.1 = A.P
My error message from the event viewer as below

User abc.COM\zzz was denied access.
Fully-Qualified-User-Name = <undetermined>
NAS-IP-Address = 192.168.0.1
NAS-Identifier = AP-Network
Called-Station-Identifier = xx:xx:xx:xx:xx:x
Calling-Station-Identifier = xx:xx:xx:xx:xx:xx
Client-Friendly-Name = APwireless
Client-IP-Address = 192.168.0.1
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1
Proxy-Policy-Name = <none>
Authentication-Provider = <undetermined>
Authentication-Server = <undetermined>
Policy-Name = <undetermined>
Authentication-Type = <undetermined>
EAP-Type = <undetermined>
Reason-Code = 49
Reason = The connection attempt did not match any connection request policy.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

AND

The address of remote RADIUS server 192.168.0.99 in remote RADIUS server
group wireless resolves to local address 192.168.0.99. The address will be
ignored.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

I would double check the policy settings. Or this search result may help.

IAS Issue CollectionsEvent ID 2: IAS Reason-Code = 48 · Event ID 2
Reason-Code = 49 · IAS Event ID 2 - Reason-Code = 65 · Event ID 2:
Reason-Code = 66 ...
www.chicagotech.net/troubleshooting/eventid2.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"jenson" <(E-Mail Removed)> wrote in message
news:4CCF196B-C802-4214-AD7C-(E-Mail Removed)...
> I'm setting up W2k3 IAS Radius server which for my wireless client to
> login
> and authenticate following this website
>
> http://www.windowsnetworking.com/kba...1xclients.html
>
> which seems pretty useful but unfortunately I could not get it work.My A.D
> and IAS radius sit on the same server.
> 192.168.0.99 = A.D & IAS Server
> 192.168.0.1 = A.P
> My error message from the event viewer as below
>
> User abc.COM\zzz was denied access.
> Fully-Qualified-User-Name = <undetermined>
> NAS-IP-Address = 192.168.0.1
> NAS-Identifier = AP-Network
> Called-Station-Identifier = xx:xx:xx:xx:xx:x
> Calling-Station-Identifier = xx:xx:xx:xx:xx:xx
> Client-Friendly-Name = APwireless
> Client-IP-Address = 192.168.0.1
> NAS-Port-Type = Wireless - IEEE 802.11
> NAS-Port = 1
> Proxy-Policy-Name = <none>
> Authentication-Provider = <undetermined>
> Authentication-Server = <undetermined>
> Policy-Name = <undetermined>
> Authentication-Type = <undetermined>
> EAP-Type = <undetermined>
> Reason-Code = 49
> Reason = The connection attempt did not match any connection request
> policy.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> AND
>
> The address of remote RADIUS server 192.168.0.99 in remote RADIUS server
> group wireless resolves to local address 192.168.0.99. The address will be
> ignored.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.