VPN w2003 - event ID 20050

Hello,

I've configured w2003 server -> routing and remote access, using PPTP

But when I try to connect from client I get error "TCP/IP CP reported error
733. A connection to the remote computer could not be completed. You might
need to adjust protocols on this computer".

In the server system log is : The user "xxx" connected to port VPN4-127 has
been disconnected because no network protocols were successfully
negotiated.(Event ID:20050)

Can you help me please??

Thank you very much

You may receive above errors if you configure Dial-in Media incorrectly. These search result may help,

Troubleshooting Windows Remote Access connections Event ID 20050, 20189 and 20078. Symptoms:. 1. The remote access server does not accept a PPTP connection. 2. Error 649 - Login failed: username, password, ...
www.chicagotech.net/VPN/rras1.htm


Event ID Troubleshooting Event ID 20050 - The user Domain\User connected to port VPNx has been disconnected Event ID 20073 - There are no authentication protocols available for use ...
www.chicagotech.net/wineventid.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message news:ef6lc9$n2s$(E-Mail Removed)...
Hello,

I've configured w2003 server -> routing and remote access, using PPTP

But when I try to connect from client I get error "TCP/IP CP reported error
733. A connection to the remote computer could not be completed. You might
need to adjust protocols on this computer".

In the server system log is : The user "xxx" connected to port VPN4-127 has
been disconnected because no network protocols were successfully
negotiated.(Event ID:20050)

Can you help me please??

Thank you very much

Than you for your reply..

My problem has been solved by setting "Static address pool" and not DHCP in
IP address assignment ... however I don't know why DHCP doesn't work,
because I have installed DHCP services.

"Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
You may receive above errors if you configure Dial-in Media incorrectly.
These search result may help,

Troubleshooting Windows Remote Access connections Event ID 20050, 20189 and
20078. Symptoms:. 1. The remote access server does not accept a PPTP
connection. 2. Error 649 - Login failed: username, password, ...
www.chicagotech.net/VPN/rras1.htm


Event ID Troubleshooting Event ID 20050 - The user Domain\User connected to
port VPNx has been disconnected Event ID 20073 - There are no authentication
protocols available for use ...
www.chicagotech.net/wineventid.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message
news:ef6lc9$n2s$(E-Mail Removed)...
Hello,

I've configured w2003 server -> routing and remote access, using PPTP

But when I try to connect from client I get error "TCP/IP CP reported
error
733. A connection to the remote computer could not be completed. You might
need to adjust protocols on this computer".

In the server system log is : The user "xxx" connected to port VPN4-127
has
been disconnected because no network protocols were successfully
negotiated.(Event ID:20050)

Can you help me please??

Thank you very much

Thank you for the update. Where is the DHCP?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message news:ef851f$1e67$(E-Mail Removed)...
Than you for your reply..

My problem has been solved by setting "Static address pool" and not DHCP in
IP address assignment ... however I don't know why DHCP doesn't work,
because I have installed DHCP services.

"Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
You may receive above errors if you configure Dial-in Media incorrectly.
These search result may help,

Troubleshooting Windows Remote Access connections Event ID 20050, 20189 and
20078. Symptoms:. 1. The remote access server does not accept a PPTP
connection. 2. Error 649 - Login failed: username, password, ...
www.chicagotech.net/VPN/rras1.htm


Event ID Troubleshooting Event ID 20050 - The user Domain\User connected to
port VPNx has been disconnected Event ID 20073 - There are no authentication
protocols available for use ...
www.chicagotech.net/wineventid.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message
news:ef6lc9$n2s$(E-Mail Removed)...
Hello,

I've configured w2003 server -> routing and remote access, using PPTP

But when I try to connect from client I get error "TCP/IP CP reported
error
733. A connection to the remote computer could not be completed. You might
need to adjust protocols on this computer".

In the server system log is : The user "xxx" connected to port VPN4-127
has
been disconnected because no network protocols were successfully
negotiated.(Event ID:20050)

Can you help me please??

Thank you very much

on the same machine as vpn server

"Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Thank you for the update. Where is the DHCP?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message
news:ef851f$1e67$(E-Mail Removed)...
Than you for your reply..

My problem has been solved by setting "Static address pool" and not DHCP
in
IP address assignment ... however I don't know why DHCP doesn't work,
because I have installed DHCP services.

"Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
You may receive above errors if you configure Dial-in Media incorrectly.
These search result may help,

Troubleshooting Windows Remote Access connections Event ID 20050, 20189
and
20078. Symptoms:. 1. The remote access server does not accept a PPTP
connection. 2. Error 649 - Login failed: username, password, ...
www.chicagotech.net/VPN/rras1.htm


Event ID Troubleshooting Event ID 20050 - The user Domain\User connected
to
port VPNx has been disconnected Event ID 20073 - There are no
authentication
protocols available for use ...
www.chicagotech.net/wineventid.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message
news:ef6lc9$n2s$(E-Mail Removed)...
Hello,

I've configured w2003 server -> routing and remote access, using PPTP

But when I try to connect from client I get error "TCP/IP CP reported
error
733. A connection to the remote computer could not be completed. You
might
need to adjust protocols on this computer".

In the server system log is : The user "xxx" connected to port VPN4-127
has
been disconnected because no network protocols were successfully
negotiated.(Event ID:20050)

Can you help me please??

Thank you very much