VPN two IP addresses

Hi,

I have setted up two newtork connections:
- the first one is my default connection to the internet
- the second one is connection to VPN server
On VPN server, there are running services accessible only from VPN
clients....the VPN network is 192.168.*.* and on the server there are
allowed in firewall only IP addresses from VPN.

Connection to VPN server works fine, but my PROBLEM is, that when I want to
access some services running on the server, firewall blocks it because it
detects my IP address which I use to connect to the internet. So it seems
like the client side programs are NOT using my address in VPN.

How can I solve this? How can I force some specific programs on client side
using IP from VPN connection?

Note: In advanced tcp/ip settings(to VPN network) I have unchecked box "use
default gateway on remote network" because I can't use this.

Thank you for replies

posting the routing table may help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message news:ehkp36$4eq$(E-Mail Removed)...
Hi,

I have setted up two newtork connections:
- the first one is my default connection to the internet
- the second one is connection to VPN server
On VPN server, there are running services accessible only from VPN
clients....the VPN network is 192.168.*.* and on the server there are
allowed in firewall only IP addresses from VPN.

Connection to VPN server works fine, but my PROBLEM is, that when I want to
access some services running on the server, firewall blocks it because it
detects my IP address which I use to connect to the internet. So it seems
like the client side programs are NOT using my address in VPN.

How can I solve this? How can I force some specific programs on client side
using IP from VPN connection?

Note: In advanced tcp/ip settings(to VPN network) I have unchecked box "use
default gateway on remote network" because I can't use this.

Thank you for replies

ok...so my problem is solved....thank you for idea with routing table,
because there were some incorrect data.
My next problem is, that if I want to access windows share (from w2003) on
VPN using IP address ex. \\192.168.0.1\share it shows me error "No network
provider accepted the given network path" - can you solve this ?


"Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
posting the routing table may help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message
news:ehkp36$4eq$(E-Mail Removed)...
Hi,

I have setted up two newtork connections:
- the first one is my default connection to the internet
- the second one is connection to VPN server
On VPN server, there are running services accessible only from VPN
clients....the VPN network is 192.168.*.* and on the server there are
allowed in firewall only IP addresses from VPN.

Connection to VPN server works fine, but my PROBLEM is, that when I want
to
access some services running on the server, firewall blocks it because it
detects my IP address which I use to connect to the internet. So it seems
like the client side programs are NOT using my address in VPN.

How can I solve this? How can I force some specific programs on client
side
using IP from VPN connection?

Note: In advanced tcp/ip settings(to VPN network) I have unchecked box
"use
default gateway on remote network" because I can't use this.

Thank you for replies

Make sure you enable file and printer sharing. This search result may help,

No network provider accepted the given network path No network provider accepted the given network path. System error 67 has occurred. The network name cannot be found. Symptoms: 1. You can access the shared ...
http://www.chicagotech.net/troublesh...temerror67.htm


xp sp "File or Network Path No Longer Exists" or "No Network Provider Accepted the Given Network Path" Errors after installing XP SP1 ...
www.chicagotech.net/xpsp.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message news:ehlgo1$has$(E-Mail Removed)...
ok...so my problem is solved....thank you for idea with routing table,
because there were some incorrect data.
My next problem is, that if I want to access windows share (from w2003) on
VPN using IP address ex. \\192.168.0.1\share it shows me error "No network
provider accepted the given network path" - can you solve this ?


"Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
posting the routing table may help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JULO" <(E-Mail Removed)> wrote in message
news:ehkp36$4eq$(E-Mail Removed)...
Hi,

I have setted up two newtork connections:
- the first one is my default connection to the internet
- the second one is connection to VPN server
On VPN server, there are running services accessible only from VPN
clients....the VPN network is 192.168.*.* and on the server there are
allowed in firewall only IP addresses from VPN.

Connection to VPN server works fine, but my PROBLEM is, that when I want
to
access some services running on the server, firewall blocks it because it
detects my IP address which I use to connect to the internet. So it seems
like the client side programs are NOT using my address in VPN.

How can I solve this? How can I force some specific programs on client
side
using IP from VPN connection?

Note: In advanced tcp/ip settings(to VPN network) I have unchecked box
"use
default gateway on remote network" because I can't use this.

Thank you for replies