| Home | Register | Members | Search | Links |
 |
| Thread Tools | Display Modes |
|
Guest
Posts: n/a
|
|
|
|
||
|
|
| |
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
Well i got it working by assigning a Static Pool. Although i dont know why i had to. I guess my router is just crap
 At home i get an ip from my linksys router just fine. Now i just have to figure out DNS. Since the router is not a DNS server i guess i need to turn it on at the server. Thanks for all the help!daniel. "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... Ok, if i setup a static pool for VPN and set my client to static, is there anything i need to do in the router/dhcp server? Other than maybe an exclusion to those ranges. Do i still use the router as the gateway? "Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... Yes, use static pool. This how to may help, How to setup a static pool of IP addresses for VPN client How to setup a static pool of IP addresses for VPN clients. Error 733: the PPP control protocol for this network protocol is not available on the server. ... http://www.howtonetworking.com/VPN/staticpool.htm Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... I have read these pages but they do not help me. I know what 733 is, and i suspect i am having an IP address issue. As stated earlier, the DHCP server is the netgear router on the work server and a linksys server on the home server. I am trying to run DHCP but i have also tried putting in a static ip into the host connection. I'm really baffled by this one. on my home server, i just enabled it and it all worked fine. Is there anything i have to do to set a static ip other than set my client connection to static with the gateway as the router? "Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... VPN error 733 is protocol issue. This search result may help, vpn error 733 Situation: one of our clients setup a XP Pro as a VPN host but they keep receiving "TCP/IP CP reported error 733 - the PPP control protocol for this network ... www.chicagotech.net/casestudy/vpnerror733.htm Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... I have 2 win 2k3 servers, one at my house and one at work. For my how machine, i just enabled RRAS and i can connect just fine. I run behind a linksys router that is the DHCP server with no DNS server. For my work server i enabled RRAS and i cannot seem to connect, even locally! I keep getting 733 errors. I am running a netgear router with the same setup as above. I tried to connect locally from the same lan to eliminate the router but i get the same error. This works at home. Does anyone have any suggestions? I have gone through the settings window by window and nothing is different. No extra software is installed on the server and the fw is disabled. I have gone through the logs but i really dont know what i am looking at. I shouldnt have to configure anything for the basic VPN to work. I need some suggestions. Any hotfixes or anything else i am missing? Both are running the latest service packs and update. thanks. daniel. |
|
|
|
|
|||
|
Guest
Posts: n/a
|
Thank you for the update.
Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... Well i got it working by assigning a Static Pool. Although i dont know why i had to. I guess my router is just crap At home i get an ip from my linksys router just fine. Now i just have to figure out DNS. Since the router is not a DNS server i guess i need to turn it on at the server. Thanks for all the help!daniel. "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... Ok, if i setup a static pool for VPN and set my client to static, is there anything i need to do in the router/dhcp server? Other than maybe an exclusion to those ranges. Do i still use the router as the gateway? "Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... Yes, use static pool. This how to may help, How to setup a static pool of IP addresses for VPN client How to setup a static pool of IP addresses for VPN clients. Error 733: the PPP control protocol for this network protocol is not available on the server. ... http://www.howtonetworking.com/VPN/staticpool.htm Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... I have read these pages but they do not help me. I know what 733 is, and i suspect i am having an IP address issue. As stated earlier, the DHCP server is the netgear router on the work server and a linksys server on the home server. I am trying to run DHCP but i have also tried putting in a static ip into the host connection. I'm really baffled by this one. on my home server, i just enabled it and it all worked fine. Is there anything i have to do to set a static ip other than set my client connection to static with the gateway as the router? "Robert L [MVP - Networking]" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... VPN error 733 is protocol issue. This search result may help, vpn error 733 Situation: one of our clients setup a XP Pro as a VPN host but they keep receiving "TCP/IP CP reported error 733 - the PPP control protocol for this network ... www.chicagotech.net/casestudy/vpnerror733.htm Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Daniel M" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... I have 2 win 2k3 servers, one at my house and one at work. For my how machine, i just enabled RRAS and i can connect just fine. I run behind a linksys router that is the DHCP server with no DNS server. For my work server i enabled RRAS and i cannot seem to connect, even locally! I keep getting 733 errors. I am running a netgear router with the same setup as above. I tried to connect locally from the same lan to eliminate the router but i get the same error. This works at home. Does anyone have any suggestions? I have gone through the settings window by window and nothing is different. No extra software is installed on the server and the fw is disabled. I have gone through the logs but i really dont know what i am looking at. I shouldnt have to configure anything for the basic VPN to work. I need some suggestions. Any hotfixes or anything else i am missing? Both are running the latest service packs and update. thanks. daniel. |
|
|
|
|
|||
|
|
| |
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| VPN client not working (error 800) | J.B. | Windows Networking | 3 | 07-13-2007 07:15 AM |
| Error logs after Win2k3 gets loadet | lushtanet | Windows Networking | 0 | 08-11-2005 12:42 PM |
| Win2K3 SP1 DCOM Error 10016 CLSID and MSM.AD1 | scottvr@pplnet.com | Windows Networking | 1 | 05-29-2005 05:24 AM |
| MSDTC error on Win2K3 | Matt Burks | Windows Networking | 3 | 05-18-2004 08:45 AM |
| Win2K3 end point routers on separate Win2K3 networks | ch | Windows Networking | 6 | 04-23-2004 06:10 PM |
Linear Mode
