VPN/DHCP on Windows 2003

Hi all,

Is it possible to give 2 differents ip addresses to a VPN client ? for
example 1.0.0.1 and 2.0.0.1
it is possible to make reservation of ip addresses for vpn clients ?

thanks in advance

I don't think you can assign two IP addresses to one client. However, you
may be able to assign an IP to the client.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Xavier" <(E-Mail Removed)> wrote in message
news:b5406e27-409b-43a9-91b4-(E-Mail Removed)...
> Hi all,
>
> Is it possible to give 2 differents ip addresses to a VPN client ? for
> example 1.0.0.1 and 2.0.0.1
> it is possible to make reservation of ip addresses for vpn clients ?
>
> thanks in advance

You can't make DHCP reservations for remote clients because the clients
do not get their config directly from DHCP. The remote access server leases
a batch of addresses from DHCP and uses those to give addresses to clients
(and one to itself for server end of the connections).

You can use a static pool of addresses instead of using DHCP, but you
cannot reserve a particular address for a particular client. Note that if
the remote clients get IPs which are in a different subnet from the LAN
machines, you will need to arrange to route traffic through the server to
get remote/LAN connectivity.

"Xavier" <(E-Mail Removed)> wrote in message
news:b5406e27-409b-43a9-91b4-(E-Mail Removed)...
> Hi all,
>
> Is it possible to give 2 differents ip addresses to a VPN client ? for
> example 1.0.0.1 and 2.0.0.1
> it is possible to make reservation of ip addresses for vpn clients ?
>
> thanks in advance

Thanks for your help and infos guys.

found also an interesting article about that :
https://msmvps.com/blogs/robwill/arc...p-options.aspx



On May 14, 7:18 pm, "Bill Grant" <not.available@online> wrote:
> You can't make DHCP reservations for remote clients because the clients
> do not get their config directly from DHCP. The remote access server leases
> a batch of addresses from DHCP and uses those to give addresses to clients
> (and one to itself for server end of the connections).
>
> You can use a static pool of addresses instead of using DHCP, but you
> cannot reserve a particular address for a particular client. Note that if
> the remote clients get IPs which are in a different subnet from the LAN
> machines, you will need to arrange to route traffic through the server to
> get remote/LAN connectivity.
>
> "Xavier" <xav...@gmail.com> wrote in message
>
> news:b5406e27-409b-43a9-91b4-(E-Mail Removed)...
>
> > Hi all,
>
> > Is it possible to give 2 differents ip addresses to a VPN client ? for
> > example 1.0.0.1 and 2.0.0.1
> > it is possible to make reservation of ip addresses for vpn clients ?
>
> > thanks in advance