VPN and dir authentication

Ok here goes the story. Im new at this.

I have a dev server runing win 2003 sbs with Routing and remote access.
This server is on a network (192.168.1.*)connected to internet through
cable. The server is setup for VPN. Clients are sucessfully able to
connect upto the server through vpn but unable to connected to any dir
that has been shared for them. The weird thing is that i also have
another server on adsl that i am able to connect to the dev server and
also the dir using the same credentials that are failing when trying to
access from other machines. The two clients that i have used to try and
access the server have been on different locations connecting through
optus cable connections (don't know if this has anything to do with it)

All ip address ranges are different on all of the networks.

i am completely stumped on what to do next or where to look. Any help
would be extremly helpful.

Thanks
Efraim
(E-Mail Removed)

posting the results of both vpn client ipconfig /all here may help.

--
For more and other information, go to http://howtonetworking.com and
http://ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on
http://www.HowToNetworking.com
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
"Eff" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Ok here goes the story. Im new at this.
>
> I have a dev server runing win 2003 sbs with Routing and remote access.
> This server is on a network (192.168.1.*)connected to internet through
> cable. The server is setup for VPN. Clients are sucessfully able to
> connect upto the server through vpn but unable to connected to any dir
> that has been shared for them. The weird thing is that i also have another
> server on adsl that i am able to connect to the dev server and also the
> dir using the same credentials that are failing when trying to access from
> other machines. The two clients that i have used to try and access the
> server have been on different locations connecting through optus cable
> connections (don't know if this has anything to do with it)
>
> All ip address ranges are different on all of the networks.
>
> i am completely stumped on what to do next or where to look. Any help
> would be extremly helpful.
>
> Thanks
> Efraim
> (E-Mail Removed)