Voip on WRT54G

Voip phones will not work on the network. Currently using WRT54G as
the DHCP server for the network. Do I need to open any ports or change
any settings that I would not have changed by setting up DHCP? This is
one of the original WRT54G's with the older 1.0x Firmware. Would
upgrading to 3.0 or higher fix the problem or do I need to run third
party Firmware to get Voip phones to work. Thanks.

(E-Mail Removed) wrote:
> Voip phones will not work on the network. Currently using WRT54G as
> the DHCP server for the network. Do I need to open any ports or change
> any settings that I would not have changed by setting up DHCP? This is
> one of the original WRT54G's with the older 1.0x Firmware. Would
> upgrading to 3.0 or higher fix the problem or do I need to run third
> party Firmware to get Voip phones to work. Thanks.
>

Upgrade the firmware. Not the hardware, if you don't have to...
Svesoft.com has 3rd party firmware for an annual $20 subscription fee...
First I'd try the linksys bios update.
http://www.linksys.com/servlet/Satel...VisitorWrapper
I've played with port settings and it seems to make no difference. (Done
this on multiple versions of the hardware and bios both.)

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----