"John Navas" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> On Wed, 28 Mar 2007 09:32:43 +1000, "cds" <(E-Mail Removed)>
> wrote in <4609a96e$0$5743$(E-Mail Removed)>:
>
>>I have an Acer laptop with ATheros wireless NIC (Inbuilt). Dlink Router
>>with
>>Dlink Access Point. Other computers can connect wirelessly but the Acer
>>with
>>Vista will not. Says it can see the connection but will not connect. Any
>>ides
>
> Reset router to factory defaults and start over with no security. Only
> enable security after all wireless is working. Step by step.
>
> --
> Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
> John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
> Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_How_To>
> Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>
Do you have MAC filtering enabled on your wireless AP? If so, add the MAC
of the Acer's wireless device so that it will be able to access your
network. Also, check your APs DHCP settings. Do you have it set to allow a
specific number of computers to receive an IP address from it? If so,
increase the number to include the Acer. If you have encryption enabled on
the AP, make sure that you configure the Acer's wireless device settings to
match that of the AP. Let us know if this solves your issue.
--
________
Just Me, D
|
Similar Threads
Linear Mode
