Virtual Server Internal Network Setup

I have VS running with two guest OS's already installed. The server it is
running on only has 2 physical Nics. I want to build four more guest OS's.
I want all 6 guest OS's have to static IP's from my own scope. I
experimanted with the Internal Network option with one of these guest OS's.
After setting the guest to Internal Network I got an IP Address of
10.237.0.16 and now it cannot communicate on my network. I made a
reservation in DHCP with the MAC and assigned it a static IP however it still
will not work. What am I doing wrong here ? Any help would be greatly
appreciated.

"Paul Cannon" <(E-Mail Removed)> wrote in message
news:B0E46BF0-DD5F-48F5-B2A1-(E-Mail Removed)...
> After setting the guest to Internal Network I got an IP Address of

You can't do that. You have to use the same physical Nic that is actually
on the LAN.

Every "selection" in the dropdown list in VS for the nic must be thought of
as a different "wire".

Physical Nic#1 is one "wire"
Physical Nic#2 is one "wire"
Internal is one "wire"
Each "Microsoft Loopback Adapter" you install is a separate "wire"

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/IS...cessRules.html

Troubleshooting Client Authentication on Access Rules in ISA Server 2004
http://download.microsoft.com/downlo...7/ts_rules.doc

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/t...dance/2004.asp
http://www.microsoft.com/isaserver/t...dance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

Deployment Guidelines for ISA Server 2004 Enterprise Edition
http://www.microsoft.com/technet/pro...isaserver.mspx
-----------------------------------------------------