using a print server on MN-820 router

Used to use Netgear RT-314 gateway/router. Connected a
Netgear PS-110 print server to it. Also connected several
devices to the router (including a switch to expand
connections).

After installing the MN-820, my printer ports (typically
named 123456_P1 for my laserjet and 123456_P2 for my
inkjet) no longer work. I've tried limiting the range of
addresses the 820 provides and pinging eachone to find
the print server - no luck. Also tried the Netgear setup
software which in effect seems to do the same thing. No
luck.

How do I connect my print server to the DHCP table so I
can print?

The MS hardware is working on the 192.168.2.x subnet,
while everybody else (?) is on the 192.168.1.x

You can change the subnet on the router to the
192.168.1.x, if the printers need that subnet

>-----Original Message-----
>Used to use Netgear RT-314 gateway/router. Connected a
>Netgear PS-110 print server to it. Also connected
several
>devices to the router (including a switch to expand
>connections).
>
>After installing the MN-820, my printer ports (typically
>named 123456_P1 for my laserjet and 123456_P2 for my
>inkjet) no longer work. I've tried limiting the range of
>addresses the 820 provides and pinging eachone to find
>the print server - no luck. Also tried the Netgear setup
>software which in effect seems to do the same thing. No
>luck.
>
>How do I connect my print server to the DHCP table so I
>can print?
>.
>