using hardware vpn endpoint and server 2003

krag

Guest

Posts: n/a

01-04-2004, 02:02 AM

The server machine has two nics. One nic has static
nonroutable ip and handles the lan with DHCP enabled. I
want to put a hardware vpn endpoint/firewall(the Snapgear
Pro) between the other nic and dsl internet with static
ip. Is this posible and will I have to set up a static
route? The Pro is capable of DHCP functions such that the
server 2003 DHCP server cand be disabled or be used as a
backup. The Snapgear device can also do NAT.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VPN endpoint without endpoint router?	ric	Home Networking	0	01-16-2007 01:27 PM
Recommendation on Hardware with 2003	>>JZ	Windows Networking	1	10-26-2005 08:21 PM
SBS 2003 - Hardware setup	Eduardo Pietri	Windows Networking	1	08-19-2005 04:54 AM
cannot access ftp server -- getpeername (in.ftpd): Transport endpoint is not connected	Matthias Hupp	Linux Networking	1	05-17-2004 04:36 PM
Windows 2003 ipsec tunnel to third party hardware firewall?	scott	Windows Networking	1	03-01-2004 06:27 PM