Userenv events 1097 and 1030

Hi,
I receive the following events in the event log every 5 minutes on a single
Windows 2003 with Active Directory and domain controller installed:

Event Source: Userenv
Event Category: None
Event ID: 1097
User: NT-AUTORITÄT\SYSTEM
Description: Das Computerkonto wurde nicht gefunden, Der Anmeldeversuch ist
fehlgeschlagen. . (Windows cannot find the machine account)

Event Source: Userenv
Event Category: None
Event ID: 1030
User: NT-AUTORITÄT\SYSTEM
Description: Die Abfrage der Liste der Gruppenrichtlinienobjekte ist
fehlgeschlagen. Überprüfen Sie das Ereignisprotokoll auf frühere
Fehlermeldungen des Richtlinienmoduls, die die Ursache für dieses Problem
beschreiben. (Windows cannot query for the list of Group Policy objects).

Any idea what is going wrong?

Regards
Holger

I would check the DNS settings first. Or these search result may help,

Event ID Troubleshooting Event ID 1053 - Userenv Event ID 1054 - Windows cannot obtain the domain controller name for your computer network. Event ID 1058, 1059 and 1030 ...
www.chicagotech.net/wineventid.htm


Event ID 1058, 1059 and 1030 Event ID 1058, 1059 and 1030. Event ID 1058 is Group Policy related issue. Normally, there are two symptoms: "network path not found" and "access denied". ...
http://www.chicagotech.net/troublesh.../event1058.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Holger Hellenschmidt" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
Hi,
I receive the following events in the event log every 5 minutes on a single
Windows 2003 with Active Directory and domain controller installed:

Event Source: Userenv
Event Category: None
Event ID: 1097
User: NT-AUTORITÄT\SYSTEM
Description: Das Computerkonto wurde nicht gefunden, Der Anmeldeversuch ist
fehlgeschlagen. . (Windows cannot find the machine account)

Event Source: Userenv
Event Category: None
Event ID: 1030
User: NT-AUTORITÄT\SYSTEM
Description: Die Abfrage der Liste der Gruppenrichtlinienobjekte ist
fehlgeschlagen. Überprüfen Sie das Ereignisprotokoll auf frühere
Fehlermeldungen des Richtlinienmoduls, die die Ursache für dieses Problem
beschreiben. (Windows cannot query for the list of Group Policy objects).

Any idea what is going wrong?

Regards
Holger

thanks for your response, I have already checked most of the knowledge base
articles, but without any sucess. I also think it is related to DNS
settings, but how can I fix it?

Maybe the following is helpful: when I run the "Group Policy Modeling
Wizard" in the Group Policy Management I get errors when using the site
"default-name-..." but no errors when using site "none". The errors are
"Component Status, Component Name, unknown error reading group policy".

Regards
Holger

"Robert L [MVP - Networking]" <(E-Mail Removed)> schrieb im Newsbeitrag
news:%(E-Mail Removed)...
I would check the DNS settings first. Or these search result may help,

Event ID Troubleshooting Event ID 1053 - Userenv Event ID 1054 - Windows
cannot obtain the domain controller name for your computer network. Event ID
1058, 1059 and 1030 ...
www.chicagotech.net/wineventid.htm

Event ID 1058, 1059 and 1030 Event ID 1058, 1059 and 1030. Event ID 1058 is
Group Policy related issue. Normally, there are two symptoms: "network path
not found" and "access denied". ...
http://www.chicagotech.net/troublesh.../event1058.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Holger Hellenschmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Hi,
I receive the following events in the event log every 5 minutes on a single
Windows 2003 with Active Directory and domain controller installed:

Event Source: Userenv
Event Category: None
Event ID: 1097
User: NT-AUTORITÄT\SYSTEM
Description: Das Computerkonto wurde nicht gefunden, Der Anmeldeversuch ist
fehlgeschlagen. . (Windows cannot find the machine account)

Event Source: Userenv
Event Category: None
Event ID: 1030
User: NT-AUTORITÄT\SYSTEM
Description: Die Abfrage der Liste der Gruppenrichtlinienobjekte ist
fehlgeschlagen. Überprüfen Sie das Ereignisprotokoll auf frühere
Fehlermeldungen des Richtlinienmoduls, die die Ursache für dieses Problem
beschreiben. (Windows cannot query for the list of Group Policy objects).

Any idea what is going wrong?

Regards
Holger

Use GPOtool.exe to troubleshoot.

Top 10 checklist of group policy troubleshooting Top 10 Checklists of Group Policy Troubleshooting. 1. Which GPO applies to your client? - Run Gpresult.exe. 2. Have you refreshed the Group Policy settings? ...
www.chicagotech.net/Security/gp10checklist.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Holger Hellenschmidt" <(E-Mail Removed)> wrote in message news:%(E-Mail Removed)...
thanks for your response, I have already checked most of the knowledge base
articles, but without any sucess. I also think it is related to DNS
settings, but how can I fix it?

Maybe the following is helpful: when I run the "Group Policy Modeling
Wizard" in the Group Policy Management I get errors when using the site
"default-name-..." but no errors when using site "none". The errors are
"Component Status, Component Name, unknown error reading group policy".

Regards
Holger

"Robert L [MVP - Networking]" <(E-Mail Removed)> schrieb im Newsbeitrag
news:%(E-Mail Removed)...
I would check the DNS settings first. Or these search result may help,

Event ID Troubleshooting Event ID 1053 - Userenv Event ID 1054 - Windows
cannot obtain the domain controller name for your computer network. Event ID
1058, 1059 and 1030 ...
www.chicagotech.net/wineventid.htm

Event ID 1058, 1059 and 1030 Event ID 1058, 1059 and 1030. Event ID 1058 is
Group Policy related issue. Normally, there are two symptoms: "network path
not found" and "access denied". ...
http://www.chicagotech.net/troublesh.../event1058.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Holger Hellenschmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Hi,
I receive the following events in the event log every 5 minutes on a single
Windows 2003 with Active Directory and domain controller installed:

Event Source: Userenv
Event Category: None
Event ID: 1097
User: NT-AUTORITÄT\SYSTEM
Description: Das Computerkonto wurde nicht gefunden, Der Anmeldeversuch ist
fehlgeschlagen. . (Windows cannot find the machine account)

Event Source: Userenv
Event Category: None
Event ID: 1030
User: NT-AUTORITÄT\SYSTEM
Description: Die Abfrage der Liste der Gruppenrichtlinienobjekte ist
fehlgeschlagen. Überprüfen Sie das Ereignisprotokoll auf frühere
Fehlermeldungen des Richtlinienmoduls, die die Ursache für dieses Problem
beschreiben. (Windows cannot query for the list of Group Policy objects).

Any idea what is going wrong?

Regards
Holger

gpotool - no errors
dcdiag - no errors
netdiag - no errors

but still every 5 minutes userenv events 1097 and 1030. When I try gpupdate
I get the same events. Any idea?

Regards
Holger

"Robert L [MVP - Networking]" <(E-Mail Removed)> schrieb im Newsbeitrag
news:%(E-Mail Removed)...
Use GPOtool.exe to troubleshoot.

Top 10 checklist of group policy troubleshooting Top 10 Checklists of Group
Policy Troubleshooting. 1. Which GPO applies to your client? - Run
Gpresult.exe. 2. Have you refreshed the Group Policy settings? ...
www.chicagotech.net/Security/gp10checklist.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Holger Hellenschmidt" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
thanks for your response, I have already checked most of the knowledge base
articles, but without any sucess. I also think it is related to DNS
settings, but how can I fix it?

Maybe the following is helpful: when I run the "Group Policy Modeling
Wizard" in the Group Policy Management I get errors when using the site
"default-name-..." but no errors when using site "none". The errors are
"Component Status, Component Name, unknown error reading group policy".

Regards
Holger

"Robert L [MVP - Networking]" <(E-Mail Removed)> schrieb im Newsbeitrag
news:%(E-Mail Removed)...
I would check the DNS settings first. Or these search result may help,

Event ID Troubleshooting Event ID 1053 - Userenv Event ID 1054 - Windows
cannot obtain the domain controller name for your computer network. Event ID
1058, 1059 and 1030 ...
www.chicagotech.net/wineventid.htm

Event ID 1058, 1059 and 1030 Event ID 1058, 1059 and 1030. Event ID 1058 is
Group Policy related issue. Normally, there are two symptoms: "network path
not found" and "access denied". ...
http://www.chicagotech.net/troublesh.../event1058.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Holger Hellenschmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Hi,
I receive the following events in the event log every 5 minutes on a single
Windows 2003 with Active Directory and domain controller installed:

Event Source: Userenv
Event Category: None
Event ID: 1097
User: NT-AUTORITÄT\SYSTEM
Description: Das Computerkonto wurde nicht gefunden, Der Anmeldeversuch ist
fehlgeschlagen. . (Windows cannot find the machine account)

Event Source: Userenv
Event Category: None
Event ID: 1030
User: NT-AUTORITÄT\SYSTEM
Description: Die Abfrage der Liste der Gruppenrichtlinienobjekte ist
fehlgeschlagen. Überprüfen Sie das Ereignisprotokoll auf frühere
Fehlermeldungen des Richtlinienmoduls, die die Ursache für dieses Problem
beschreiben. (Windows cannot query for the list of Group Policy objects).

Any idea what is going wrong?

Regards
Holger