Updating firmware on a Dlink 604+

Does anyone know how to do this?

I've downloaded the latest firmware update but it's just a DAT file.

Can anyone help please

Thanks

Si

"Dunesea" wrote:

> Does anyone know how to do this?
>
> I've downloaded the latest firmware update but it's just a DAT file.

That's because you don't run a firmware file on your PC, you usually just
have to tell the router where it is. I have a netgear router, so I can't
offer specific advice, but with mine I enter the routers setup menu by
pointing my web browser at 192.168.0.1 and then select "Gateway Upgrade"
which provides access to a file browser to select the new firmware file
from off my PC's harddrive. I assume DLink has a similar system.


Dave.

"higgy" <(E-Mail Removed)> wrote in message
news:Xns955FE35FE34CFhiggyslackerhotmailc@195.92.1 93.157...
> "Dunesea" wrote:
>
>> Does anyone know how to do this?
>>
>> I've downloaded the latest firmware update but it's just a DAT file.
>
> That's because you don't run a firmware file on your PC, you usually just
> have to tell the router where it is. I have a netgear router, so I can't
> offer specific advice, but with mine I enter the routers setup menu by
> pointing my web browser at 192.168.0.1 and then select "Gateway Upgrade"
> which provides access to a file browser to select the new firmware file
> from off my PC's harddrive. I assume DLink has a similar system.

yup. Just log in to the router, go to maintenance and then select update
firmware. You then just locate update file on your PC and bob's your uncle.

"Bob J" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> "higgy" <(E-Mail Removed)> wrote in message
> news:Xns955FE35FE34CFhiggyslackerhotmailc@195.92.1 93.157...
> > "Dunesea" wrote:
> >
> >> Does anyone know how to do this?
> >>
> >> I've downloaded the latest firmware update but it's just a DAT file.
> >
> > That's because you don't run a firmware file on your PC, you usually
just
> > have to tell the router where it is. I have a netgear router, so I can't
> > offer specific advice, but with mine I enter the routers setup menu by
> > pointing my web browser at 192.168.0.1 and then select "Gateway Upgrade"
> > which provides access to a file browser to select the new firmware file
> > from off my PC's harddrive. I assume DLink has a similar system.
>
> yup. Just log in to the router, go to maintenance and then select update
> firmware. You then just locate update file on your PC and bob's your
uncle.
>
>

ok cheers guys, done it,

Didn't know it was that simple to be honest, tells you nothing in the
manual. but hey we are talking about dlink here :-\