Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Updated Networking Tutorials?

Reply
Thread Tools Display Modes

Updated Networking Tutorials?

 
 
Parrot
Guest
Posts: n/a

 
      06-19-2005, 12:08 AM
Hi guys,
I have been trying to set up a wireless, ad hoc network in my home between a
desktop PC and a laptop, both running win XP home and hoping to be able to
access the internet on the laptop via the Broadband modem attached to the
desktop.
I have been using this page from Barb Bowman.....
http://www.microsoft.com/windowsxp/u...mspx?pf=trueHi

Unfortunately, it seems to be out of date or relating to an earlier version
of XP because the references and pictures don't match what happens on my PC
screens.
For instance, she has a picture with "wireless Network connection
Properties" and there are 4 tabs across the top but when I get to that page
on my PC there are only 2 tabs, "General" and "wireless networks".
So, as good as that article may be, I get thrown off right at the start.
Is there maybe an updated, idiot proof version anywhere that I can follow
step by step and picture by picture to get this network up and running.Cheers,
Steve

 
Reply With Quote
 
 
 
 
Kevin
Guest
Posts: n/a

 
      06-19-2005, 04:01 AM
Amazingly enough, there is actually good information in Windows own Help and
Support feature. Yes, I know it's quite a shock to the system, but the
information in there is really very good and well written. You can also
find this information in the Control Panel>Network and Internet
Connections>Set up or Change Your Home Network.

"Parrot" <(E-Mail Removed)> wrote in message
news2224EBA-FA11-4FF8-B1AD-(E-Mail Removed)...
> Hi guys,
> I have been trying to set up a wireless, ad hoc network in my home between
> a
> desktop PC and a laptop, both running win XP home and hoping to be able to
> access the internet on the laptop via the Broadband modem attached to the
> desktop.
> I have been using this page from Barb Bowman......
> http://www.microsoft.com/windowsxp/u...mspx?pf=trueHi
>
> Unfortunately, it seems to be out of date or relating to an earlier
> version
> of XP because the references and pictures don't match what happens on my
> PC
> screens.
> For instance, she has a picture with "wireless Network connection
> Properties" and there are 4 tabs across the top but when I get to that
> page
> on my PC there are only 2 tabs, "General" and "wireless networks".
> So, as good as that article may be, I get thrown off right at the start.
> Is there maybe an updated, idiot proof version anywhere that I can follow
> step by step and picture by picture to get this network up and
> running.Cheers,
> Steve
>



 
Reply With Quote
 
Parrot
Guest
Posts: n/a

 
      06-19-2005, 10:33 AM
Yes, My flabber was completely gasted when i noticed the help section in
windows XP.
Sadly, it wasn't a great deal of help.
Why not, Steve?
OK, I'll tell you.
Here is some of the blurb from the help pages.

For a wireless connection, do the following:
Click the wireless connection, and then, under Network Tasks, click Change
settings of this connection. On the Wireless Networks tab, click a wireless
network in the list, and then click Properties.
On the Authentication tab, make sure that the Enable IEEE 802.1x
authentication for this network check box is selected.

All well and good if you can do anything under the Authentication tab. In
my case, the whole page is greyed out and there is no way to change the tick
boxes.
Consequently, I can't get any further unless I want a connection to both of
my computers that is wide open to anyone within range.

 
Reply With Quote
 
Kevin
Guest
Posts: n/a

 
      06-20-2005, 01:40 AM
So, I take it that you can not run the Network Setup Wizard?

"Parrot" <(E-Mail Removed)> wrote in message
news:270BE4E9-41A7-42CF-9C2C-(E-Mail Removed)...
> Yes, My flabber was completely gasted when i noticed the help section in
> windows XP.
> Sadly, it wasn't a great deal of help.
> Why not, Steve?
> OK, I'll tell you.
> Here is some of the blurb from the help pages.
>
> For a wireless connection, do the following:
> Click the wireless connection, and then, under Network Tasks, click Change
> settings of this connection. On the Wireless Networks tab, click a
> wireless
> network in the list, and then click Properties.
> On the Authentication tab, make sure that the Enable IEEE 802.1x
> authentication for this network check box is selected.
>
> All well and good if you can do anything under the Authentication tab. In
> my case, the whole page is greyed out and there is no way to change the
> tick
> boxes.
> Consequently, I can't get any further unless I want a connection to both
> of
> my computers that is wide open to anyone within range.
>



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Management Tutorials DimsGroups Broadband 0 11-17-2008 05:14 AM
tutorials krakesh1984@gmail.com Wireless Internet 0 01-18-2008 02:58 PM
tutorials krakesh1984@gmail.com Wireless Internet 0 01-18-2008 02:49 PM
Wifi networking advanced tutorials pebaugh Wireless Internet 2 11-26-2007 03:39 AM
Uninstall updated Microsoft Broadband Networking on XP SP2 =?Utf-8?B?UG9tcGlkb2U=?= Broadband Hardware 2 01-29-2005 03:55 PM



1 2 3 4 5 6 7 8 9 10 11