Unable To Retain Wireless Configurations

In order to get my wireless connection to work, I have had to select the 'Use
Windows To Configure My Wireless Network Settings' within the Wireless
Networks tab and start the Wireless Zero Configuration within Settings
(Local). When I turn the computer off, these settings are lost and I have to
repeat this exercise everytime I turn the computer on. How do I permanently
retain these settings?

"Deacon" wrote:

> In order to get my wireless connection to work, I have had to select the 'Use
> Windows To Configure My Wireless Network Settings' within the Wireless
> Networks tab and start the Wireless Zero Configuration within Settings
> (Local). When I turn the computer off, these settings are lost and I have to
> repeat this exercise everytime I turn the computer on. How do I permanently
> retain these settings?

I recently had this issue with a client, how installed the Wireless
manufacturer Utility to manage the connection, while the Windows Zero
configuration (WZC) was ON.
Both the manufacturer and WZC were conflicting and making the Wireless lose
on start or after a while.
Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
of wireless manufacturer utility installed and Also be sure the Wireless
Utility for the manufacturer is Auto running in the servcies.
If you have just the windows Wireless utility to manage the wireless
connection then proceed:

Try this:
Open a Run Command and type in:
services.msc click [OK].
On the services control Panel scroll down to Windows Zero Wireless
configuration and Be sure the service to start Automatically instead of
manually.
Click Ok then close the services control panel window and Reboot and see if
the service will hold it's settings to Auto.
If not then try this Key in the Registry:
Open Run and type in:
regedit.exe click OK and on the Registry Editor Locate this key and change
the value in the Right Pane/window to (2):
[-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =

[ON]Start REG_DWORD 0x00000002 (2)


[-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =

ON]Start REG_DWORD 0x00000004 (4)

Be warrend back or write down the settings before and after the editing, if
any thing gone wrong you can restore back.
HTH.
Regards,
nass
------------
www.nasstec.co.uk

How do I ascertain whether the Wireless Manfacturer utility is being utilised?

"nass" wrote:

>
>
> "Deacon" wrote:
>
> > In order to get my wireless connection to work, I have had to select the 'Use
> > Windows To Configure My Wireless Network Settings' within the Wireless
> > Networks tab and start the Wireless Zero Configuration within Settings
> > (Local). When I turn the computer off, these settings are lost and I have to
> > repeat this exercise everytime I turn the computer on. How do I permanently
> > retain these settings?
>
> I recently had this issue with a client, how installed the Wireless
> manufacturer Utility to manage the connection, while the Windows Zero
> configuration (WZC) was ON.
> Both the manufacturer and WZC were conflicting and making the Wireless lose
> on start or after a while.
> Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
> of wireless manufacturer utility installed and Also be sure the Wireless
> Utility for the manufacturer is Auto running in the servcies.
> If you have just the windows Wireless utility to manage the wireless
> connection then proceed:
>
> Try this:
> Open a Run Command and type in:
> services.msc click [OK].
> On the services control Panel scroll down to Windows Zero Wireless
> configuration and Be sure the service to start Automatically instead of
> manually.
> Click Ok then close the services control panel window and Reboot and see if
> the service will hold it's settings to Auto.
> If not then try this Key in the Registry:
> Open Run and type in:
> regedit.exe click OK and on the Registry Editor Locate this key and change
> the value in the Right Pane/window to (2):
> [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =
>
> [ON]Start REG_DWORD 0x00000002 (2)
>
>
> [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =
>
> ON]Start REG_DWORD 0x00000004 (4)
>
> Be warrend back or write down the settings before and after the editing, if
> any thing gone wrong you can restore back.
> HTH.
> Regards,
> nass
> ------------
> www.nasstec.co.uk

You can look in the programs, usually if something like Netgear or belkin
will show you a monitor (which why they call Wireless Monitoring utility) and
see if it there, as I don't know your wireless Brand/Manufacturer name I
can't see it is integrated into your system and Windows is the Utility
monitoring it.
Did you install the software for it when you installed it?.
HTH.
Regards,
nass


"Deacon" wrote:

> How do I ascertain whether the Wireless Manfacturer utility is being utilised?
>
> "nass" wrote:
>
> >
> >
> > "Deacon" wrote:
> >
> > > In order to get my wireless connection to work, I have had to select the 'Use
> > > Windows To Configure My Wireless Network Settings' within the Wireless
> > > Networks tab and start the Wireless Zero Configuration within Settings
> > > (Local). When I turn the computer off, these settings are lost and I have to
> > > repeat this exercise everytime I turn the computer on. How do I permanently
> > > retain these settings?
> >
> > I recently had this issue with a client, how installed the Wireless
> > manufacturer Utility to manage the connection, while the Windows Zero
> > configuration (WZC) was ON.
> > Both the manufacturer and WZC were conflicting and making the Wireless lose
> > on start or after a while.
> > Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
> > of wireless manufacturer utility installed and Also be sure the Wireless
> > Utility for the manufacturer is Auto running in the servcies.
> > If you have just the windows Wireless utility to manage the wireless
> > connection then proceed:
> >
> > Try this:
> > Open a Run Command and type in:
> > services.msc click [OK].
> > On the services control Panel scroll down to Windows Zero Wireless
> > configuration and Be sure the service to start Automatically instead of
> > manually.
> > Click Ok then close the services control panel window and Reboot and see if
> > the service will hold it's settings to Auto.
> > If not then try this Key in the Registry:
> > Open Run and type in:
> > regedit.exe click OK and on the Registry Editor Locate this key and change
> > the value in the Right Pane/window to (2):
> > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =
> >
> > [ON]Start REG_DWORD 0x00000002 (2)
> >
> >
> > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =
> >
> > ON]Start REG_DWORD 0x00000004 (4)
> >
> > Be warrend back or write down the settings before and after the editing, if
> > any thing gone wrong you can restore back.
> > HTH.
> > Regards,
> > nass
> > ------------
> > www.nasstec.co.uk

Thanks.

It's a Netscape router provided by AOL therefore the original set-up was via
the disk supplied by AOL.

The set-up failed at stage 5 of 5 and I have since been trying to rectify
the problem myself.

When I have been through to the AOL helpdesk they have taken me through the
Windows configurations but, as you have said, there is obviously a conflict
somewhere.

Appreciate your help.


"nass" wrote:

> You can look in the programs, usually if something like Netgear or belkin
> will show you a monitor (which why they call Wireless Monitoring utility) and
> see if it there, as I don't know your wireless Brand/Manufacturer name I
> can't see it is integrated into your system and Windows is the Utility
> monitoring it.
> Did you install the software for it when you installed it?.
> HTH.
> Regards,
> nass
>
>
> "Deacon" wrote:
>
> > How do I ascertain whether the Wireless Manfacturer utility is being utilised?
> >
> > "nass" wrote:
> >
> > >
> > >
> > > "Deacon" wrote:
> > >
> > > > In order to get my wireless connection to work, I have had to select the 'Use
> > > > Windows To Configure My Wireless Network Settings' within the Wireless
> > > > Networks tab and start the Wireless Zero Configuration within Settings
> > > > (Local). When I turn the computer off, these settings are lost and I have to
> > > > repeat this exercise everytime I turn the computer on. How do I permanently
> > > > retain these settings?
> > >
> > > I recently had this issue with a client, how installed the Wireless
> > > manufacturer Utility to manage the connection, while the Windows Zero
> > > configuration (WZC) was ON.
> > > Both the manufacturer and WZC were conflicting and making the Wireless lose
> > > on start or after a while.
> > > Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
> > > of wireless manufacturer utility installed and Also be sure the Wireless
> > > Utility for the manufacturer is Auto running in the servcies.
> > > If you have just the windows Wireless utility to manage the wireless
> > > connection then proceed:
> > >
> > > Try this:
> > > Open a Run Command and type in:
> > > services.msc click [OK].
> > > On the services control Panel scroll down to Windows Zero Wireless
> > > configuration and Be sure the service to start Automatically instead of
> > > manually.
> > > Click Ok then close the services control panel window and Reboot and see if
> > > the service will hold it's settings to Auto.
> > > If not then try this Key in the Registry:
> > > Open Run and type in:
> > > regedit.exe click OK and on the Registry Editor Locate this key and change
> > > the value in the Right Pane/window to (2):
> > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =
> > >
> > > [ON]Start REG_DWORD 0x00000002 (2)
> > >
> > >
> > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =
> > >
> > > ON]Start REG_DWORD 0x00000004 (4)
> > >
> > > Be warrend back or write down the settings before and after the editing, if
> > > any thing gone wrong you can restore back.
> > > HTH.
> > > Regards,
> > > nass
> > > ------------
> > > www.nasstec.co.uk

Sorry - that's NetGear not NetScape and it's a DG834G

"Deacon" wrote:

> Thanks.
>
> It's a Netscape router provided by AOL therefore the original set-up was via
> the disk supplied by AOL.
>
> The set-up failed at stage 5 of 5 and I have since been trying to rectify
> the problem myself.
>
> When I have been through to the AOL helpdesk they have taken me through the
> Windows configurations but, as you have said, there is obviously a conflict
> somewhere.
>
> Appreciate your help.
>
>
> "nass" wrote:
>
> > You can look in the programs, usually if something like Netgear or belkin
> > will show you a monitor (which why they call Wireless Monitoring utility) and
> > see if it there, as I don't know your wireless Brand/Manufacturer name I
> > can't see it is integrated into your system and Windows is the Utility
> > monitoring it.
> > Did you install the software for it when you installed it?.
> > HTH.
> > Regards,
> > nass
> >
> >
> > "Deacon" wrote:
> >
> > > How do I ascertain whether the Wireless Manfacturer utility is being utilised?
> > >
> > > "nass" wrote:
> > >
> > > >
> > > >
> > > > "Deacon" wrote:
> > > >
> > > > > In order to get my wireless connection to work, I have had to select the 'Use
> > > > > Windows To Configure My Wireless Network Settings' within the Wireless
> > > > > Networks tab and start the Wireless Zero Configuration within Settings
> > > > > (Local). When I turn the computer off, these settings are lost and I have to
> > > > > repeat this exercise everytime I turn the computer on. How do I permanently
> > > > > retain these settings?
> > > >
> > > > I recently had this issue with a client, how installed the Wireless
> > > > manufacturer Utility to manage the connection, while the Windows Zero
> > > > configuration (WZC) was ON.
> > > > Both the manufacturer and WZC were conflicting and making the Wireless lose
> > > > on start or after a while.
> > > > Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
> > > > of wireless manufacturer utility installed and Also be sure the Wireless
> > > > Utility for the manufacturer is Auto running in the servcies.
> > > > If you have just the windows Wireless utility to manage the wireless
> > > > connection then proceed:
> > > >
> > > > Try this:
> > > > Open a Run Command and type in:
> > > > services.msc click [OK].
> > > > On the services control Panel scroll down to Windows Zero Wireless
> > > > configuration and Be sure the service to start Automatically instead of
> > > > manually.
> > > > Click Ok then close the services control panel window and Reboot and see if
> > > > the service will hold it's settings to Auto.
> > > > If not then try this Key in the Registry:
> > > > Open Run and type in:
> > > > regedit.exe click OK and on the Registry Editor Locate this key and change
> > > > the value in the Right Pane/window to (2):
> > > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =
> > > >
> > > > [ON]Start REG_DWORD 0x00000002 (2)
> > > >
> > > >
> > > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =
> > > >
> > > > ON]Start REG_DWORD 0x00000004 (4)
> > > >
> > > > Be warrend back or write down the settings before and after the editing, if
> > > > any thing gone wrong you can restore back.
> > > > HTH.
> > > > Regards,
> > > > nass
> > > > ------------
> > > > www.nasstec.co.uk

Problem sorted and everything working - thanks for your help

"nass" wrote:

> You can look in the programs, usually if something like Netgear or belkin
> will show you a monitor (which why they call Wireless Monitoring utility) and
> see if it there, as I don't know your wireless Brand/Manufacturer name I
> can't see it is integrated into your system and Windows is the Utility
> monitoring it.
> Did you install the software for it when you installed it?.
> HTH.
> Regards,
> nass
>
>
> "Deacon" wrote:
>
> > How do I ascertain whether the Wireless Manfacturer utility is being utilised?
> >
> > "nass" wrote:
> >
> > >
> > >
> > > "Deacon" wrote:
> > >
> > > > In order to get my wireless connection to work, I have had to select the 'Use
> > > > Windows To Configure My Wireless Network Settings' within the Wireless
> > > > Networks tab and start the Wireless Zero Configuration within Settings
> > > > (Local). When I turn the computer off, these settings are lost and I have to
> > > > repeat this exercise everytime I turn the computer on. How do I permanently
> > > > retain these settings?
> > >
> > > I recently had this issue with a client, how installed the Wireless
> > > manufacturer Utility to manage the connection, while the Windows Zero
> > > configuration (WZC) was ON.
> > > Both the manufacturer and WZC were conflicting and making the Wireless lose
> > > on start or after a while.
> > > Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
> > > of wireless manufacturer utility installed and Also be sure the Wireless
> > > Utility for the manufacturer is Auto running in the servcies.
> > > If you have just the windows Wireless utility to manage the wireless
> > > connection then proceed:
> > >
> > > Try this:
> > > Open a Run Command and type in:
> > > services.msc click [OK].
> > > On the services control Panel scroll down to Windows Zero Wireless
> > > configuration and Be sure the service to start Automatically instead of
> > > manually.
> > > Click Ok then close the services control panel window and Reboot and see if
> > > the service will hold it's settings to Auto.
> > > If not then try this Key in the Registry:
> > > Open Run and type in:
> > > regedit.exe click OK and on the Registry Editor Locate this key and change
> > > the value in the Right Pane/window to (2):
> > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =
> > >
> > > [ON]Start REG_DWORD 0x00000002 (2)
> > >
> > >
> > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =
> > >
> > > ON]Start REG_DWORD 0x00000004 (4)
> > >
> > > Be warrend back or write down the settings before and after the editing, if
> > > any thing gone wrong you can restore back.
> > > HTH.
> > > Regards,
> > > nass
> > > ------------
> > > www.nasstec.co.uk

You are welcome and glad it sorted out,thanks for letting us know.
Good luck.
Regards,
nass

"Deacon" wrote:

> Problem sorted and everything working - thanks for your help
>
> "nass" wrote:
>
> > You can look in the programs, usually if something like Netgear or belkin
> > will show you a monitor (which why they call Wireless Monitoring utility) and
> > see if it there, as I don't know your wireless Brand/Manufacturer name I
> > can't see it is integrated into your system and Windows is the Utility
> > monitoring it.
> > Did you install the software for it when you installed it?.
> > HTH.
> > Regards,
> > nass
> >
> >
> > "Deacon" wrote:
> >
> > > How do I ascertain whether the Wireless Manfacturer utility is being utilised?
> > >
> > > "nass" wrote:
> > >
> > > >
> > > >
> > > > "Deacon" wrote:
> > > >
> > > > > In order to get my wireless connection to work, I have had to select the 'Use
> > > > > Windows To Configure My Wireless Network Settings' within the Wireless
> > > > > Networks tab and start the Wireless Zero Configuration within Settings
> > > > > (Local). When I turn the computer off, these settings are lost and I have to
> > > > > repeat this exercise everytime I turn the computer on. How do I permanently
> > > > > retain these settings?
> > > >
> > > > I recently had this issue with a client, how installed the Wireless
> > > > manufacturer Utility to manage the connection, while the Windows Zero
> > > > configuration (WZC) was ON.
> > > > Both the manufacturer and WZC were conflicting and making the Wireless lose
> > > > on start or after a while.
> > > > Try to Disable the WZC if you have the wireless Adapter/USB or whatever kind
> > > > of wireless manufacturer utility installed and Also be sure the Wireless
> > > > Utility for the manufacturer is Auto running in the servcies.
> > > > If you have just the windows Wireless utility to manage the wireless
> > > > connection then proceed:
> > > >
> > > > Try this:
> > > > Open a Run Command and type in:
> > > > services.msc click [OK].
> > > > On the services control Panel scroll down to Windows Zero Wireless
> > > > configuration and Be sure the service to start Automatically instead of
> > > > manually.
> > > > Click Ok then close the services control panel window and Reboot and see if
> > > > the service will hold it's settings to Auto.
> > > > If not then try this Key in the Registry:
> > > > Open Run and type in:
> > > > regedit.exe click OK and on the Registry Editor Locate this key and change
> > > > the value in the Right Pane/window to (2):
> > > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\WZCSVC =
> > > >
> > > > [ON]Start REG_DWORD 0x00000002 (2)
> > > >
> > > >
> > > > [-]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc =
> > > >
> > > > ON]Start REG_DWORD 0x00000004 (4)
> > > >
> > > > Be warrend back or write down the settings before and after the editing, if
> > > > any thing gone wrong you can restore back.
> > > > HTH.
> > > > Regards,
> > > > nass
> > > > ------------
> > > > www.nasstec.co.uk

wzc failing to start after reboot

EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com