Unable to connect to sever resourse using netbios name

Can someone please help with the following issue. When I attempt to connect
to a server via UNC from certain servers I am getting the following error
returned 'No network provider accepted the given network path'. I am able
to connect to the server if I replace the netbios name with the FQDN or IP
address. I can ping the server in question using the netbios name - I can
also see the netbios name resolved to the correct IP address when I look at
the cache using the command line 'nbtstat -c'.

I'm at a loss.

Thanks
G

These search results may help,

No network provider accepted the given network path No network provider accepted the given network path. System error 67 has occurred. The network name cannot be found. Symptoms: 1. You can access the shared ...
http://www.chicagotech.net/troublesh...temerror67.htm


xp sp "File or Network Path No Longer Exists" or "No Network Provider Accepted the Given Network Path" Errors after installing XP SP1 ...
www.chicagotech.net/xpsp.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"G" <(E-Mail Removed)> wrote in message news:44AEE908-3951-404A-9EF8-(E-Mail Removed)...
Can someone please help with the following issue. When I attempt to connect
to a server via UNC from certain servers I am getting the following error
returned 'No network provider accepted the given network path'. I am able
to connect to the server if I replace the netbios name with the FQDN or IP
address. I can ping the server in question using the netbios name - I can
also see the netbios name resolved to the correct IP address when I look at
the cache using the command line 'nbtstat -c'.

I'm at a loss.

Thanks
G

Thanks Robert, but unfortunately I was unable to find any pertinent solution
to this issue from the search results you've posted.

Just to add a further note - I am able to connect to server's resources from
one of my Domain Controllers and all of my PC's without a problem. I have
compared the NIC config's and can't see anything different.
--
G


"Robert L [MVP - Networking]" wrote:

> These search results may help,
>
> No network provider accepted the given network path No network provider accepted the given network path. System error 67 has occurred. The network name cannot be found. Symptoms: 1. You can access the shared ...
> http://www.chicagotech.net/troublesh...temerror67.htm
>
>
> xp sp "File or Network Path No Longer Exists" or "No Network Provider Accepted the Given Network Path" Errors after installing XP SP1 ...
> www.chicagotech.net/xpsp.htm
>
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "G" <(E-Mail Removed)> wrote in message news:44AEE908-3951-404A-9EF8-(E-Mail Removed)...
> Can someone please help with the following issue. When I attempt to connect
> to a server via UNC from certain servers I am getting the following error
> returned 'No network provider accepted the given network path'. I am able
> to connect to the server if I replace the netbios name with the FQDN or IP
> address. I can ping the server in question using the netbios name - I can
> also see the netbios name resolved to the correct IP address when I look at
> the cache using the command line 'nbtstat -c'.
>
> I'm at a loss.
>
> Thanks
> G

Thanks Robert, but unfortunately I was unable to find any pertinent solution
to this issue from the search results you've posted.

Just to add a further note - I am able to connect to server's resources from
one of my Domain Controllers and all of my PC's without a problem. I have
compared the NIC config's and can't see anything different.
--
G


"Robert L [MVP - Networking]" wrote:

> These search results may help,
>
> No network provider accepted the given network path No network provider accepted the given network path. System error 67 has occurred. The network name cannot be found. Symptoms: 1. You can access the shared ...
> http://www.chicagotech.net/troublesh...temerror67.htm
>
>
> xp sp "File or Network Path No Longer Exists" or "No Network Provider Accepted the Given Network Path" Errors after installing XP SP1 ...
> www.chicagotech.net/xpsp.htm
>
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "G" <(E-Mail Removed)> wrote in message news:44AEE908-3951-404A-9EF8-(E-Mail Removed)...
> Can someone please help with the following issue. When I attempt to connect
> to a server via UNC from certain servers I am getting the following error
> returned 'No network provider accepted the given network path'. I am able
> to connect to the server if I replace the netbios name with the FQDN or IP
> address. I can ping the server in question using the netbios name - I can
> also see the netbios name resolved to the correct IP address when I look at
> the cache using the command line 'nbtstat -c'.
>
> I'm at a loss.
>
> Thanks
> G

What's the system error if you do net view \\remotepcip?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"G" <(E-Mail Removed)> wrote in message news:44AEE908-3951-404A-9EF8-(E-Mail Removed)...
Can someone please help with the following issue. When I attempt to connect
to a server via UNC from certain servers I am getting the following error
returned 'No network provider accepted the given network path'. I am able
to connect to the server if I replace the netbios name with the FQDN or IP
address. I can ping the server in question using the netbios name - I can
also see the netbios name resolved to the correct IP address when I look at
the cache using the command line 'nbtstat -c'.

I'm at a loss.

Thanks
G

I then get the listed shares available for the server. If I then do a 'net
view \\remotepcnetbiosname I get a system error 53 returned.
--
G


"Robert L [MVP - Networking]" wrote:

> What's the system error if you do net view \\remotepcip?
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "G" <(E-Mail Removed)> wrote in message news:44AEE908-3951-404A-9EF8-(E-Mail Removed)...
> Can someone please help with the following issue. When I attempt to connect
> to a server via UNC from certain servers I am getting the following error
> returned 'No network provider accepted the given network path'. I am able
> to connect to the server if I replace the netbios name with the FQDN or IP
> address. I can ping the server in question using the netbios name - I can
> also see the netbios name resolved to the correct IP address when I look at
> the cache using the command line 'nbtstat -c'.
>
> I'm at a loss.
>
> Thanks
> G