Disconnect the firewall device. If browsing works then, you either have a
firewall configuration problem or the device isn't really in "transparent"
mode.
--
Richard G. Harper [MVP Shell/User]
(E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* My website, such as it is ...
http://rgharper.mvps.org/
* HELP us help YOU ...
http://www.dts-l.org/goodpost.htm
"Sergio" <(E-Mail Removed)> wrote in message
news:B3684486-2676-4BD7-B374-(E-Mail Removed)...
>I have four remote sites that each of them belong to a different subnets
>and
> each of the remote sites has a router. That this four routers are
> connected
> by a frame relay. Previously I can browse the remote PC's on the other
> sites
> thru network neighborhood.
>
> But when I've installed a firewall on my network. Specifically on the
> site
> where I work. (The firewall is just behind the router from the frame
> relay.)
> I can't anymore browse the pc of the remote sites. The only pc that I can
> browse are the pc that belongs to my subnet...
> I configured the firewall in a transparent mode that it just like acts
> like
> a switch. Also I disable the blocking capabilities of the firewall. Also
> I
> already enabled the WINS on my network, but still I can't browse the other
> remote pc.
>
> But I got a response from my "PING"
>
> Please help me.
>
> Thanks!!!
Similar Threads
Linear Mode
