Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > U.S. Robotics 805416 + Windows XP SP2 + WPA = problems? (Long message)

Reply
Thread Tools Display Modes

U.S. Robotics 805416 + Windows XP SP2 + WPA = problems? (Long message)

 
 
Lucifer
Guest
Posts: n/a

 
      11-11-2004, 02:49 PM
Hi, I would like to know if anybody else is experimenting a strange
issue using configuration of this message Subject.

I'm setting up a wireless network with three PC: two of them are wired
connected to a U.S. Robotics 139106 router and the third one is
wireless connected using a U.S. Robotics 805416 PCI wireless card; all
computers have Windows XP SP2 updated with latest patches; all U.S.
Robotics peripherals drivers are updated with latest release
available.

The problem it's on wireless connected machine and can be experimented
ONLY enabling WPA encryption.

In fact, with WPA encryption enabled, during operative system boot-up,
after desktop appears and while startup application (antivirus,
wireless control center) are launching, system seems to freeze for
about three minutes; during this period, it's impossible to use PC and
wireless network it's obviously inaccessible (from the same PC). Then,
suddenly, HD restart working, system startup regularly ends and all
it's perfectly working.

Disabling WPA and using WEP encryption (or disabling encryption at
all), all works fine, without system startup issues.

Reading on newsgroups similar messages, I though it could be an
antivirus software related issue, but I removed antivirus from system
and the issue remain identical... WPA = freeze.

I wrote an e-mail to U.S. Robotics to signal the strange issue, but I
don't think I'll never receive an answer...

Thanks in advance,

Lucifer
lucifer_27#@#hotmail.com (Remove '#' near '@' to reply: no SPAM, please...)
Athlon XP Barton 2500+@2300MHz on ASUS A7V600 (200MHz x 11.5 @ 1.75 VCore)
 
Reply With Quote
 
 
 
 
Tony Field
Guest
Posts: n/a

 
      11-13-2004, 09:15 PM

Snip
> I'm setting up a wireless network with three PC: two of them are wired
> connected to a U.S. Robotics 139106 router and the third one is
> wireless connected using a U.S. Robotics 805416 PCI wireless card; all
> computers have Windows XP SP2 updated with latest patches; all U.S.
> Robotics peripherals drivers are updated with latest release
> available.
>
> The problem it's on wireless connected machine and can be experimented
> ONLY enabling WPA encryption.
>
> In fact, with WPA encryption enabled, during operative system boot-up,
> after desktop appears and while startup application (antivirus,
> wireless control center) are launching, system seems to freeze for
> about three minutes; during this period, it's impossible to use PC and
> wireless network it's obviously inaccessible (from the same PC). Then,
> suddenly, HD restart working, system startup regularly ends and all
> it's perfectly working.
>
> Disabling WPA and using WEP encryption (or disabling encryption at
> all), all works fine, without system startup issues.
>

Snip


Are you sure that the 9106 supports WPA?
From my looking on the web site, I could not see it listed. This might
explain why with a miss match between the items they are not happy.

Regards

Tony


 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pppd & gprs cannot get ip (long message) Eismann Linux Networking 1 10-03-2006 11:51 PM
Problems replicating after long time disconnection. Sune T. Tougaard Windows Networking 16 04-07-2006 09:28 AM
sendmsg(): Message too long [*stressnet*] Yannick Loth Linux Networking 0 07-13-2005 03:43 PM
balloon message and wireless connection problems pls help Roger Wireless Networks 8 06-27-2005 08:05 PM
Mail server Message-ID problems Roy Souther Linux Networking 2 12-09-2003 07:07 PM



1 2 3 4 5 6 7 8 9 10 11