In article <104b701c43f4c$8c373830$(E-Mail Removed)>, "Pol"
<(E-Mail Removed)> wrote:
>My office has a "hard-wired" LAN involving two PC's which
>have Windows 98 OS. I want one of the PC's to access a
>separate wireless LAN for internet access via a wireless
>network adapter.
>
>I can't get the browser (IE) to recognise the wireless
>network - and having set the options to "access internet
>via LAN" IE is looking for access via the hard-wired network!
>
>Is there any way that Windows 98 can facilitate what I'm
>trying to achieve or am I going to have to upgrade OS to
>2000 or XP?
An upgrade isn't needed.
Does the hard-wired LAN have an Internet connection? If not, the
solution is to remove the default gateway specification from that LAN.
If the hard-wired LAN does have an Internet connection, the solution
is to specify a lower metric for the wireless LAN than for the
hard-wired LAN.
A look at the route table will show what default gateways exist. Open
a command prompt window and type:
route print
Lines starting with "0.0.0.0 0.0.0.0" show default gateways.
If you'd like, post a reply to this message with a copy of the route
table. You can write the route table to a file with the command:
route print >route.txt
and then copy/paste the contents of the route.txt file into a message.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com
Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm