Networking Forums

Networking Forums > Computer Networking > Windows Networking > how to troubleshoot wireless networking with Win98SE

Reply
Thread Tools Display Modes

how to troubleshoot wireless networking with Win98SE

 
 
Rob
Guest
Posts: n/a

 
      05-23-2004, 10:09 PM
Request for Technical Support for Wireless Networking
using Windows98SE
Date Submitted: 23-May-2004
From: Robert Herman ((E-Mail Removed))

PROBLEM: Windows98SE PC cannot connect to internet or
map other PCs on network LAN

Suspected cause: may need to reconfigure W98 network
stack or TCP/IP properties

Equipment Used: 3 PCs on local network, configured as
follows
Buffalo G54 base station connected to cable internet on
WAN side, and DELL XPS Windows XP on LAN side
Buffalo G54 cardbus connected to DELL notebook PC
running Windows XP
Buffalo G54 PCI card connected to desktop PC running
Windows 98SE
Buffalo G54C repeater: not being used

Current connectivity:
DELL XPS able to connect to internet, run email, and can
access files on both notebook PC and desktop PC
DELL notebook able to connect to internet and run email,
access files on both DELL XPS and desktop PC
desktop PC can PING both of the other PCs, can PING the
base station (router), and can PING the cable modem
desktop PC cannot PING www.yahoo.com, unable to find DNS
server when running internet explorer
desktop PC running Buffalo Client Manager connects to
base station at 30-50% signal strength, 11-54mbps

Troubleshooting Information:
winipcfg on desktop PC shows DNS server 192.168.11.1
broadcast node
ethernet adapter address 00-07-40-D8-96-85
IP adddress 192.168.11.5
subnet mask 255.255.255.0
default gateway 192.168.11.1
DCHP server 192.168.11.1
I entered the Host Name as 192.168.11.5 and Domain name
as "Herman_internet"

TCP/IP properties for Buffalo PCI-G54 are set to obtain
IP address automatically
DNS is disabled
no gateways are installed

Internet Explorer connectivity is set to access via LAN
using automatic detect
No proxy server

primary network logon is set to Client for Microsoft
Networks

If I try entering DNS and gateway information into the
TCP/IP settings,
these are overwritten when using Buffalo client manager
to connect to base station

Notes: Norton Internet Security software on DELL XPS has
been disabled.
Firewall is NOT active on software or hardware settings.
Do any of the PCs need to have "internet connection
sharing" turned ON ??
DELL XPS shows default gateway, DNS server, and DCHP
server as 192.168.254.254
DELL XPS shows WAN IP as 67.169.27.180
I have written down all of the MAC addresses for each
adapter card.


PLEASE provide detailed instructions on how to proceed !
Is there any technical paper which gives step by step
instructions on how to reconfigure Win98 settings for
this specific situation ?

Thank you,

(E-Mail Removed)


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wireless Networking with Win98se whichedge Windows Networking 3 02-02-2006 06:52 AM
Win98SE: wifi connects to router but not to internet (2 diff. mfgr.cards), troubleshoot how? mscir Wireless Internet 10 01-07-2006 03:05 PM
WIN98SE networking with XP RLB Windows Networking 3 01-11-2004 10:58 PM
networking win98se to win3.11 Adriano Rodrigues Windows Networking 7 07-26-2003 01:42 PM
Re: Networking Win98SE and WinXP Steve Winograd [MVP] Windows Networking 0 07-04-2003 02:47 AM



1 2 3 4 5 6 7 8 9 10 11