Toshiba Tecra S1 -> D-Link DI-614+

Hi,

I have a Toshiba Tecra S1 with build in wifi adapter.
Tried to get it work in combination with a D-Link DI-614+
access point. I can see in the logfile of the D-Link DI-614+
that the PC connects, however I keep getting the message
connection failed on the Toshiba.

DHCP server on the D-Link DI-614+ is on. Has anyone
an idea how to get this working?

Thanks,

Theo

"Theo" <(E-Mail Removed)> wrote...
> Hi,
>
> I have a Toshiba Tecra S1 with build in wifi adapter.
> Tried to get it work in combination with a D-Link DI-614+
> access point. I can see in the logfile of the D-Link DI-614+
> that the PC connects, however I keep getting the message
> connection failed on the Toshiba.
>
> DHCP server on the D-Link DI-614+ is on. Has anyone
> an idea how to get this working?

Is WEP enabled on one and not the other?

"Darrel Toepfer" <(E-Mail Removed)> wrote in message
news:cTtZa.12757$(E-Mail Removed) ...
> "Theo" <(E-Mail Removed)> wrote...
> > Hi,
> >
> > I have a Toshiba Tecra S1 with build in wifi adapter.
> > Tried to get it work in combination with a D-Link DI-614+
> > access point. I can see in the logfile of the D-Link DI-614+
> > that the PC connects, however I keep getting the message
> > connection failed on the Toshiba.
> >
> > DHCP server on the D-Link DI-614+ is on. Has anyone
> > an idea how to get this working?
>
> Is WEP enabled on one and not the other?
>
>
>
Sorry, forgot supply that info, no, WEP disabled on both.

Theo

"Theo" <(E-Mail Removed)> skrev i melding
news:3f366a43$0$49107$(E-Mail Removed)...
> Hi,
>
> I have a Toshiba Tecra S1 with build in wifi adapter.
> Tried to get it work in combination with a D-Link DI-614+
> access point. I can see in the logfile of the D-Link DI-614+
> that the PC connects, however I keep getting the message
> connection failed on the Toshiba.
>
> DHCP server on the D-Link DI-614+ is on. Has anyone
> an idea how to get this working?

Try to disable the 22/44 Mb settings, running the router at ordinary 802.11b
standard. Have experienced the same with a SMC 22 Mb router and an USB Cnet
card supporting only standard 802.11b specs.

"Arild Bjørk" <(E-Mail Removed)> wrote in message
news:qluZa.12544$(E-Mail Removed)...
> "Theo" <(E-Mail Removed)> skrev i melding
> news:3f366a43$0$49107$(E-Mail Removed)...
> > Hi,
> >
> > I have a Toshiba Tecra S1 with build in wifi adapter.
> > Tried to get it work in combination with a D-Link DI-614+
> > access point. I can see in the logfile of the D-Link DI-614+
> > that the PC connects, however I keep getting the message
> > connection failed on the Toshiba.
> >
> > DHCP server on the D-Link DI-614+ is on. Has anyone
> > an idea how to get this working?
>
> Try to disable the 22/44 Mb settings, running the router at ordinary
802.11b
> standard. Have experienced the same with a SMC 22 Mb router and an USB
Cnet
> card supporting only standard 802.11b specs.
>

Would you know by change how to disable this? I have gone
through all the menus but couldn't find any setting that would
allow me to alter the speed settings/standard.

Thanks,

Theo

"Theo" <(E-Mail Removed)> skrev i melding
news:3f368e65$0$49102$(E-Mail Removed)...
> "Arild Bjørk" <(E-Mail Removed)> wrote in message
> news:qluZa.12544$(E-Mail Removed)...
> > "Theo" <(E-Mail Removed)> skrev i melding
> > news:3f366a43$0$49107$(E-Mail Removed)...
....
> > Try to disable the 22/44 Mb settings, running the router at ordinary
> 802.11b
> > standard. Have experienced the same with a SMC 22 Mb router and an USB
> Cnet
> > card supporting only standard 802.11b specs.
> >
>
> Would you know by change how to disable this? I have gone
> through all the menus but couldn't find any setting that would
> allow me to alter the speed settings/standard.
....

You'll find it under Advanced - Performance

- Disable 4x mode.
- Set Basic rates to 1-2-5.5-11 (Mbps)
- Set TX rates to 1-2-5.5-11 (Mbps)

"Arild Bjørk" <(E-Mail Removed)> wrote in message
news:vMyZa.12594$(E-Mail Removed)...
> "Theo" <(E-Mail Removed)> skrev i melding
> news:3f368e65$0$49102$(E-Mail Removed)...
> > "Arild Bjørk" <(E-Mail Removed)> wrote in message
> > news:qluZa.12544$(E-Mail Removed)...
> > > "Theo" <(E-Mail Removed)> skrev i melding
> > > news:3f366a43$0$49107$(E-Mail Removed)...
> ...
> > > Try to disable the 22/44 Mb settings, running the router at ordinary
> > 802.11b
> > > standard. Have experienced the same with a SMC 22 Mb router and an USB
> > Cnet
> > > card supporting only standard 802.11b specs.
> > >
> >
> > Would you know by change how to disable this? I have gone
> > through all the menus but couldn't find any setting that would
> > allow me to alter the speed settings/standard.
> ...
>
> You'll find it under Advanced - Performance
>
> - Disable 4x mode.
> - Set Basic rates to 1-2-5.5-11 (Mbps)
> - Set TX rates to 1-2-5.5-11 (Mbps)
>

Thanks! I'll give it a try.

Theo
>

"Theo" <(E-Mail Removed)> wrote in message
news:3f366a43$0$49107$(E-Mail Removed)...
> Hi,
>
> I have a Toshiba Tecra S1 with build in wifi adapter.
> Tried to get it work in combination with a D-Link DI-614+
> access point. I can see in the logfile of the D-Link DI-614+
> that the PC connects, however I keep getting the message
> connection failed on the Toshiba.
>
> DHCP server on the D-Link DI-614+ is on. Has anyone
> an idea how to get this working?
>
> Thanks,
>
> Theo
>

Ok, major goofup made!! :-( Under advanced setup for
the wireless adaptor there's this radio button to switch
the radio on....

Strange thing remains that although the radio was off,
I could see the DHCP request in the logger on the
D-Link.

Thanks anyway to all that tried to help out.

Theo (who feels like a complete idiot att)