Tiscali and D-Link G604T

Hi all,

I'm trying to set up a D-Link G604T wireless ADSL router for someone. One PC
will used a wired connection, a second, located in another room, will use
wireless.

Haven't set up the wireless aspect of things yet, however the wired PC
(running XP) is happily connected to the router and obtaining an IP address
etc. Unfortunately, the router doesn't seem willing to connect to Tiscali
:-(

Could someone give me some ideas of the correct settings to use, please? The
following options are available in the router's setup page, and I've
included the default values (or at least, the values that were present when
I got my hands on the thing - the owner has had previous attempts to set
this up!)

Name: WAN_PPPoA_0_38
Type: PPPoA

PPP Settings
Encapsulation: LLC or VC - LLC selected
Username: As standard DSL connection
Password: As standard DSL connection
Idle timeout: 60 mins
Keep alive: 10 mins
MAX fail: 10 times
MRU: 1400 bytes
Set Route: Selected
On Demand: Selected

PVC Settings
VPI:8
VCI:35
QoS: UBR selected
PCR: not set
SCR not set

Many thanks in advance,

Rob Ashburn.

"Viking Mail" <(E-Mail Removed)> wrote in message
news:PHqVd.1718$(E-Mail Removed)...
> Hi all,
>
> I'm trying to set up a D-Link G604T wireless ADSL router for someone. One
PC
> will used a wired connection, a second, located in another room, will use
> wireless.
>

> PVC Settings
> VPI:8
> VCI:35

shouldn't these be 0 & 38 ?

> > PVC Settings
> > VPI:8
> > VCI:35
>
> shouldn't these be 0 & 38 ?

Thanks for that - having hunted around Tiscali's website, I think you're
right. How do the rest of the settings look?

Rob.

"Viking Mail" <(E-Mail Removed)> wrote in message
news:gpAVd.96$(E-Mail Removed)...
> > > PVC Settings
> > > VPI:8
> > > VCI:35
> >
> > shouldn't these be 0 & 38 ?
>
> Thanks for that - having hunted around Tiscali's website, I think you're
> right. How do the rest of the settings look?

not sure, I don't use ADSL, just remembered those two from my ADSL days ;-)
PPoa sounds good though ;-)

P.

on 02/03/2005, Viking Mail supposed :
> Haven't set up the wireless aspect of things yet, however the wired PC
> (running XP) is happily connected to the router and obtaining an IP address
> etc. Unfortunately, the router doesn't seem willing to connect to Tiscali
> :-(

PPPoA
VPI 0
VCI 38
VC-based

Idle timeout I think should be zero, but not essential.

--

Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.org

Viking Mail wrote:
> Hi all,
>
> I'm trying to set up a D-Link G604T wireless ADSL router for someone.
> One PC will used a wired connection, a second, located in another
> room, will use wireless.
>
> Haven't set up the wireless aspect of things yet, however the wired PC
> (running XP) is happily connected to the router and obtaining an IP
> address etc. Unfortunately, the router doesn't seem willing to
> connect to Tiscali :-(
>
> Could someone give me some ideas of the correct settings to use,
> please? The following options are available in the router's setup
> page, and I've included the default values (or at least, the values
> that were present when I got my hands on the thing - the owner has
> had previous attempts to set this up!)
>
> Name: WAN_PPPoA_0_38
> Type: PPPoA
>
> PPP Settings
> Encapsulation: LLC or VC - LLC selected
> Username: As standard DSL connection
> Password: As standard DSL connection
> Idle timeout: 60 mins
> Keep alive: 10 mins
> MAX fail: 10 times
> MRU: 1400 bytes
> Set Route: Selected
> On Demand: Selected
>
> PVC Settings
> VPI:8
> VCI:35
> QoS: UBR selected
> PCR: not set
> SCR not set
>
> Many thanks in advance,
>
> Rob Ashburn.

I use a D-Link DSL-300G+ modem, its settings are as follows:-

Connection type :- PPPoA
Encapsulation :- VC Mux
Use Name :- your tiscali user name
Password:- your tiscali password
Authentication :- CHAP
Connect on Demand :- Enabled
Idle time :- 0
VPI/VCI :- 0,38

HTH

--
(E-Mail Removed)
Reply address is spamtrapped. Remove theobvious for valid e-mail address

Thanks guys,

It's all set up and running now. Much appreciated!

Rob Ashburn

Paul King Wrote:
> Viking Mail wrote:-
> Hi all,
>
> I'm trying to set up a D-Link G604T wireless ADSL router for someone.
> One PC will used a wired connection, a second, located in another
> room, will use wireless.
>
> Haven't set up the wireless aspect of things yet, however the wire
> PC
> (running XP) is happily connected to the router and obtaining an IP
> address etc. Unfortunately, the router doesn't seem willing to
> connect to Tiscali :-(
>
> Could someone give me some ideas of the correct settings to use,
> please? The following options are available in the router's setup
> page, and I've included the default values (or at least, the values
> that were present when I got my hands on the thing - the owner has
> had previous attempts to set this up!)
>
> Name: WAN_PPPoA_0_38
> Type: PPPoA
>
> PPP Settings
> Encapsulation: LLC or VC - LLC selected
> Username: As standard DSL connection
> Password: As standard DSL connection
> Idle timeout: 60 mins
> Keep alive: 10 mins
> MAX fail: 10 times
> MRU: 1400 bytes
> Set Route: Selected
> On Demand: Selected
>
> PVC Settings
> VPI:8
> VCI:35
> QoS: UBR selected
> PCR: not set
> SCR not set
>
> Many thanks in advance,
>
> Rob Ashburn.-
>
> I use a D-Link DSL-300G+ modem, its settings are as follows:-
>
> Connection type :- PPPoA
> Encapsulation :- VC Mux
> Use Name :- your tiscali user name
> Password:- your tiscali password
> Authentication :- CHAP
> Connect on Demand :- Enabled
> Idle time :- 0
> VPI/VCI :- 0,38
>
> HTH
>
> --
> (E-Mail Removed)
> Reply address is spamtrapped. Remove theobvious for valid e-mai
> address

I am also having this problem and I have tried the figures but th
D-link asdl router still wont connect to the internet
if anybody could help...Thanks in advanc

--
Jester