TCP/IP for wireless card

How do I install a TCP/IP for a linksys wpc54G?
The adapter is shown, as is the NetBEUI, just can't
figure out how to get a TCP/IP

"add" > "protocol" >microsoft >tcp/ip

in conjtrol panel >network of course :>


"Don V" <(E-Mail Removed)> wrote in message
news:add701c3ec10$378830d0$(E-Mail Removed)...
> How do I install a TCP/IP for a linksys wpc54G?
> The adapter is shown, as is the NetBEUI, just can't
> figure out how to get a TCP/IP

Tried that, I have about 5 TCP/IP adapters installed,
just not one for the wireless Adapter. Can I use an
ethernet TCP/IP adapter? or do I need to find a wireless
TCP/IP adapter?
>-----Original Message-----
>"add" > "protocol" >microsoft >tcp/ip
>
>in conjtrol panel >network of course :>
>
>
>"Don V" <(E-Mail Removed)> wrote in
message
>news:add701c3ec10$378830d0$(E-Mail Removed)...
>> How do I install a TCP/IP for a linksys wpc54G?
>> The adapter is shown, as is the NetBEUI, just can't
>> figure out how to get a TCP/IP
>
>
>.
>

You will need to remove some of the unused TCP/IP bindings in the list of
Network components before you will be able to add TCP/IP to your wireless
card.

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm

<(E-Mail Removed)> wrote in message
news:a68801c3ec25$cda34400$(E-Mail Removed)...
> Tried that, I have about 5 TCP/IP adapters installed,
> just not one for the wireless Adapter. Can I use an
> ethernet TCP/IP adapter? or do I need to find a wireless
> TCP/IP adapter?
>>-----Original Message-----
>>"add" > "protocol" >microsoft >tcp/ip
>>
>>in conjtrol panel >network of course :>
>>
>>
>>"Don V" <(E-Mail Removed)> wrote in
> message
>>news:add701c3ec10$378830d0$(E-Mail Removed)...
>>> How do I install a TCP/IP for a linksys wpc54G?
>>> The adapter is shown, as is the NetBEUI, just can't
>>> figure out how to get a TCP/IP
>>
>>
>>.
>>

In article <(E-Mail Removed)>, "Richard G.
Harper" <(E-Mail Removed)> wrote:
>>>"Don V" <(E-Mail Removed)> wrote in
>> message
>>>news:add701c3ec10$378830d0$(E-Mail Removed).. .
>>>> How do I install a TCP/IP for a linksys wpc54G?
>>>> The adapter is shown, as is the NetBEUI, just can't
>>>> figure out how to get a TCP/IP
>
>You will need to remove some of the unused TCP/IP bindings in the list of
>Network components before you will be able to add TCP/IP to your wireless
>card.

Or, you can increase the maximum number of allowed TCP/IP bindings, as
shown here:

Unable to Bind Protocols to More Than 5 Network Adapters
http://support.microsoft.com/?id=217744

Remove NetBEUI unless you have a specific need for it.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm