Having troyble setting up VPN with SBS 2003

I am having trouble setting up a VPN connection to a new
SBS 2003 install. I have one Nic card for the server and
a cable/DSL router to the network. I get a verifying user
name and password, but it times out and does not make the
final connection. I have forwarded ports 137-138 UDP and
139 TCP to the servers internal IP address. Port 53, 500,
1701 & 1723 are all forwarded to the server's address as
well. The user has permission to remotely access the
network. Am I missing something? I am trying to connect
using PPTP.

TIA,
Greg


Greg

quoted from http://www.ChicagoTech.net
Which ports need to be opened for running VPN

A: PPTP VPN uses TCP Port 1723, IP Protocol 47 (GRE); L2TP: UDP Port 1701;
IPSec: Pass IP protocol 50 and 51. Note: 47 is a protocol number and not
TCP port. The protocol name is GRE. It'll make a big difference when
configuring your firewall or router.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"Greg" <(E-Mail Removed)> wrote in message
news:0c4201c3c0b5$d9156f20$(E-Mail Removed)...
> I am having trouble setting up a VPN connection to a new
> SBS 2003 install. I have one Nic card for the server and
> a cable/DSL router to the network. I get a verifying user
> name and password, but it times out and does not make the
> final connection. I have forwarded ports 137-138 UDP and
> 139 TCP to the servers internal IP address. Port 53, 500,
> 1701 & 1723 are all forwarded to the server's address as
> well. The user has permission to remotely access the
> network. Am I missing something? I am trying to connect
> using PPTP.
>
> TIA,
> Greg

As Bob said, you only need to forward tcp port 1723 from the router to the
server for PPTP to work. You should then be able to make a connection using
the router's public IP. Have you verified the server setup by connecting
locally from a LAN client to the server's LAN IP?

Your router must allow GRE in both directions. All "tunnel" traffic is
encrypted and travels through the Internet as the payload of IP packets with
GRE headers. So PPTP can set up the tunnel, but nothing goes through it if
the router blocks GRE.


"Robert L [MS-MVP]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> quoted from http://www.ChicagoTech.net
> Which ports need to be opened for running VPN
>
> A: PPTP VPN uses TCP Port 1723, IP Protocol 47 (GRE); L2TP: UDP Port 1701;
> IPSec: Pass IP protocol 50 and 51. Note: 47 is a protocol number and not
> TCP port. The protocol name is GRE. It'll make a big difference when
> configuring your firewall or router.
> --
> For more and other information, go to http://www.ChicagoTech.net
>
>
> Don't send e-mail or reply to me except you need consulting services.
> Posting on MS newsgroup will benefit all readers and you may get more
help.
>
> Robert Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
> http://www.ChicagoTech.net
> This posting is provided "AS IS" with no warranties.
>
> "Greg" <(E-Mail Removed)> wrote in message
> news:0c4201c3c0b5$d9156f20$(E-Mail Removed)...
> > I am having trouble setting up a VPN connection to a new
> > SBS 2003 install. I have one Nic card for the server and
> > a cable/DSL router to the network. I get a verifying user
> > name and password, but it times out and does not make the
> > final connection. I have forwarded ports 137-138 UDP and
> > 139 TCP to the servers internal IP address. Port 53, 500,
> > 1701 & 1723 are all forwarded to the server's address as
> > well. The user has permission to remotely access the
> > network. Am I missing something? I am trying to connect
> > using PPTP.
> >
> > TIA,
> > Greg
>
>

Thanks for the tip. It seems to be working.
Greg

>-----Original Message-----
>quoted from http://www.ChicagoTech.net
>Which ports need to be opened for running VPN
>
>A: PPTP VPN uses TCP Port 1723, IP Protocol 47 (GRE);
L2TP: UDP Port 1701;
>IPSec: Pass IP protocol 50 and 51. Note: 47 is a
protocol number and not
>TCP port. The protocol name is GRE. It'll make a big
difference when
>configuring your firewall or router.
>--
>For more and other information, go to
http://www.ChicagoTech.net
>
>
>Don't send e-mail or reply to me except you need
consulting services.
>Posting on MS newsgroup will benefit all readers and you
may get more help.
>
>Robert Lin, MS-MVP, MCSE & CNE
>Networking, Internet, Routing, VPN, Anti-Virus, Tips &
Troubleshooting on
>http://www.ChicagoTech.net
>This posting is provided "AS IS" with no warranties.
>
>"Greg" <(E-Mail Removed)> wrote in
message
>news:0c4201c3c0b5$d9156f20$(E-Mail Removed)...
>> I am having trouble setting up a VPN connection to a new
>> SBS 2003 install. I have one Nic card for the server
and
>> a cable/DSL router to the network. I get a verifying
user
>> name and password, but it times out and does not make
the
>> final connection. I have forwarded ports 137-138 UDP
and
>> 139 TCP to the servers internal IP address. Port 53,
500,
>> 1701 & 1723 are all forwarded to the server's address as
>> well. The user has permission to remotely access the
>> network. Am I missing something? I am trying to
connect
>> using PPTP.
>>
>> TIA,
>> Greg
>
>
>.
>

I have port 1723 & 1701 forwarded to the servers LAN IP
address. I still cannot connect through the VPN. I only
have one NIC on the server and a Linksys cable/dsl router.
The clients on the LAN connect fine and can see the
server. I'm stumped.

Greg
>-----Original Message-----
> As Bob said, you only need to forward tcp port 1723
from the router to the
>server for PPTP to work. You should then be able to make
a connection using
>the router's public IP. Have you verified the server
setup by connecting
>locally from a LAN client to the server's LAN IP?
>
> Your router must allow GRE in both directions.
All "tunnel" traffic is
>encrypted and travels through the Internet as the payload
of IP packets with
>GRE headers. So PPTP can set up the tunnel, but nothing
goes through it if
>the router blocks GRE.
>
>
>"Robert L [MS-MVP]" <(E-Mail Removed)> wrote in message
>news:(E-Mail Removed)...
>> quoted from http://www.ChicagoTech.net
>> Which ports need to be opened for running VPN
>>
>> A: PPTP VPN uses TCP Port 1723, IP Protocol 47 (GRE);
L2TP: UDP Port 1701;
>> IPSec: Pass IP protocol 50 and 51. Note: 47 is a
protocol number and not
>> TCP port. The protocol name is GRE. It'll make a big
difference when
>> configuring your firewall or router.
>> --
>> For more and other information, go to
http://www.ChicagoTech.net
>>
>>
>> Don't send e-mail or reply to me except you need
consulting services.
>> Posting on MS newsgroup will benefit all readers and
you may get more
>help.
>>
>> Robert Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN, Anti-Virus, Tips &
Troubleshooting on
>> http://www.ChicagoTech.net
>> This posting is provided "AS IS" with no warranties.
>>
>> "Greg" <(E-Mail Removed)> wrote in
message
>> news:0c4201c3c0b5$d9156f20$(E-Mail Removed)...
>> > I am having trouble setting up a VPN connection to a
new
>> > SBS 2003 install. I have one Nic card for the server
and
>> > a cable/DSL router to the network. I get a verifying
user
>> > name and password, but it times out and does not make
the
>> > final connection. I have forwarded ports 137-138 UDP
and
>> > 139 TCP to the servers internal IP address. Port 53,
500,
>> > 1701 & 1723 are all forwarded to the server's address
as
>> > well. The user has permission to remotely access the
>> > network. Am I missing something? I am trying to
connect
>> > using PPTP.
>> >
>> > TIA,
>> > Greg
>>
>>
>
>
>.
>

You don't need 1701. That is for L2tp. (And it is the udp, not tcp
port.)

If the Linksys blocks GRE, you won't get any PPTP traffic through. If
the Linksys has a DMZ port, test the connection using that. (Just to prove
to yourself that GRE is the problem).

"Greg" <(E-Mail Removed)> wrote in message
news:067d01c3c311$9f8575d0$(E-Mail Removed)...
> I have port 1723 & 1701 forwarded to the servers LAN IP
> address. I still cannot connect through the VPN. I only
> have one NIC on the server and a Linksys cable/dsl router.
> The clients on the LAN connect fine and can see the
> server. I'm stumped.
>
> Greg
> >-----Original Message-----
> > As Bob said, you only need to forward tcp port 1723
> from the router to the
> >server for PPTP to work. You should then be able to make
> a connection using
> >the router's public IP. Have you verified the server
> setup by connecting
> >locally from a LAN client to the server's LAN IP?
> >
> > Your router must allow GRE in both directions.
> All "tunnel" traffic is
> >encrypted and travels through the Internet as the payload
> of IP packets with
> >GRE headers. So PPTP can set up the tunnel, but nothing
> goes through it if
> >the router blocks GRE.
> >
> >
> >"Robert L [MS-MVP]" <(E-Mail Removed)> wrote in message
> >news:(E-Mail Removed)...
> >> quoted from http://www.ChicagoTech.net
> >> Which ports need to be opened for running VPN
> >>
> >> A: PPTP VPN uses TCP Port 1723, IP Protocol 47 (GRE);
> L2TP: UDP Port 1701;
> >> IPSec: Pass IP protocol 50 and 51. Note: 47 is a
> protocol number and not
> >> TCP port. The protocol name is GRE. It'll make a big
> difference when
> >> configuring your firewall or router.
> >> --
> >> For more and other information, go to
> http://www.ChicagoTech.net
> >>
> >>
> >> Don't send e-mail or reply to me except you need
> consulting services.
> >> Posting on MS newsgroup will benefit all readers and
> you may get more
> >help.
> >>
> >> Robert Lin, MS-MVP, MCSE & CNE
> >> Networking, Internet, Routing, VPN, Anti-Virus, Tips &
> Troubleshooting on
> >> http://www.ChicagoTech.net
> >> This posting is provided "AS IS" with no warranties.
> >>
> >> "Greg" <(E-Mail Removed)> wrote in
> message
> >> news:0c4201c3c0b5$d9156f20$(E-Mail Removed)...
> >> > I am having trouble setting up a VPN connection to a
> new
> >> > SBS 2003 install. I have one Nic card for the server
> and
> >> > a cable/DSL router to the network. I get a verifying
> user
> >> > name and password, but it times out and does not make
> the
> >> > final connection. I have forwarded ports 137-138 UDP
> and
> >> > 139 TCP to the servers internal IP address. Port 53,
> 500,
> >> > 1701 & 1723 are all forwarded to the server's address
> as
> >> > well. The user has permission to remotely access the
> >> > network. Am I missing something? I am trying to
> connect
> >> > using PPTP.
> >> >
> >> > TIA,
> >> > Greg
> >>
> >>
> >
> >
> >.
> >