IAS IP Address

I've setup IAS and DHCP server. Now there is an appliance which request
authentication to IAS server. I will also provide an IP Address. The
authentication works but I cannot provide an ip address from the DHCP scope.
Is this possible and how do i have to setup this?
The situation:
Client connects to the appliance
Appliance RADIUS request (and IP address)
Radius Reply to appliance (but no IP Address)
Client connect bu t hasn't IP address.
When I set an ip address in the dialup tab the client get that ip address
but it has to be assigned.
I Hope somebody could help.



Erik van den Brink

What is the appliance, and how is it connected to your DHCP server?
Anthony,
http://www.airdesk.co.uk


"Erik van den Brink" <(E-Mail Removed)> wrote in
message news:9AD0E1A6-C826-4523-AF40-(E-Mail Removed)...
> I've setup IAS and DHCP server. Now there is an appliance which request
> authentication to IAS server. I will also provide an IP Address. The
> authentication works but I cannot provide an ip address from the DHCP
> scope.
> Is this possible and how do i have to setup this?
> The situation:
> Client connects to the appliance
> Appliance RADIUS request (and IP address)
> Radius Reply to appliance (but no IP Address)
> Client connect bu t hasn't IP address.
> When I set an ip address in the dialup tab the client get that ip address
> but it has to be assigned.
> I Hope somebody could help.
>

The clients are GPRS and the appliance used to onnect the clients is unknown.
I will ask Vodafone what they use. There is a VPN tunnel between the
appliance and the RADIUS server. My idea was to let RADIUS provide an ip
address from the DHCP server with framed IP.

"Anthony [MVP]" wrote:

> What is the appliance, and how is it connected to your DHCP server?
> Anthony,
> http://www.airdesk.co.uk
>
>
> "Erik van den Brink" <(E-Mail Removed)> wrote in
> message news:9AD0E1A6-C826-4523-AF40-(E-Mail Removed)...
> > I've setup IAS and DHCP server. Now there is an appliance which request
> > authentication to IAS server. I will also provide an IP Address. The
> > authentication works but I cannot provide an ip address from the DHCP
> > scope.
> > Is this possible and how do i have to setup this?
> > The situation:
> > Client connects to the appliance
> > Appliance RADIUS request (and IP address)
> > Radius Reply to appliance (but no IP Address)
> > Client connect bu t hasn't IP address.
> > When I set an ip address in the dialup tab the client get that ip address
> > but it has to be assigned.
> > I Hope somebody could help.
> >
>
>
>

I'd be inclined to start with how the Vodafone appliance allocates
addresses,
Anthony
http://www.airdesk.co.uk


"Erik van den Brink" <(E-Mail Removed)> wrote in
message news:192124FB-1B12-47D5-8D6B-(E-Mail Removed)...
> The clients are GPRS and the appliance used to onnect the clients is
> unknown.
> I will ask Vodafone what they use. There is a VPN tunnel between the
> appliance and the RADIUS server. My idea was to let RADIUS provide an ip
> address from the DHCP server with framed IP.
>
> "Anthony [MVP]" wrote:
>
>> What is the appliance, and how is it connected to your DHCP server?
>> Anthony,
>> http://www.airdesk.co.uk
>>
>>
>> "Erik van den Brink" <(E-Mail Removed)> wrote in
>> message news:9AD0E1A6-C826-4523-AF40-(E-Mail Removed)...
>> > I've setup IAS and DHCP server. Now there is an appliance which request
>> > authentication to IAS server. I will also provide an IP Address. The
>> > authentication works but I cannot provide an ip address from the DHCP
>> > scope.
>> > Is this possible and how do i have to setup this?
>> > The situation:
>> > Client connects to the appliance
>> > Appliance RADIUS request (and IP address)
>> > Radius Reply to appliance (but no IP Address)
>> > Client connect bu t hasn't IP address.
>> > When I set an ip address in the dialup tab the client get that ip
>> > address
>> > but it has to be assigned.
>> > I Hope somebody could help.
>> >
>>
>>
>>

I don't know what you exactly means, but when I enter an ip Address in the
dial-in tab of the user the client gets that (framed) ip address. But I would
like to do it dynamicly. So the appliance does the Radius request and when i
send in the answer of that request a ip address then is it wil works.


"Anthony [MVP]" wrote:

> I'd be inclined to start with how the Vodafone appliance allocates
> addresses,
> Anthony
> http://www.airdesk.co.uk
>
>
> "Erik van den Brink" <(E-Mail Removed)> wrote in
> message news:192124FB-1B12-47D5-8D6B-(E-Mail Removed)...
> > The clients are GPRS and the appliance used to onnect the clients is
> > unknown.
> > I will ask Vodafone what they use. There is a VPN tunnel between the
> > appliance and the RADIUS server. My idea was to let RADIUS provide an ip
> > address from the DHCP server with framed IP.
> >
> > "Anthony [MVP]" wrote:
> >
> >> What is the appliance, and how is it connected to your DHCP server?
> >> Anthony,
> >> http://www.airdesk.co.uk
> >>
> >>
> >> "Erik van den Brink" <(E-Mail Removed)> wrote in
> >> message news:9AD0E1A6-C826-4523-AF40-(E-Mail Removed)...
> >> > I've setup IAS and DHCP server. Now there is an appliance which request
> >> > authentication to IAS server. I will also provide an IP Address. The
> >> > authentication works but I cannot provide an ip address from the DHCP
> >> > scope.
> >> > Is this possible and how do i have to setup this?
> >> > The situation:
> >> > Client connects to the appliance
> >> > Appliance RADIUS request (and IP address)
> >> > Radius Reply to appliance (but no IP Address)
> >> > Client connect bu t hasn't IP address.
> >> > When I set an ip address in the dialup tab the client get that ip
> >> > address
> >> > but it has to be assigned.
> >> > I Hope somebody could help.
> >> >
> >>
> >>
> >>
>
>
>

I'm afraid I don't think I can help you. I would expect that to be
configured at the Vodafone appliance end.
Anthony,
http://www.airdesk.co.uk


"Erik van den Brink" <(E-Mail Removed)> wrote in
message news:7A3FBE6E-243D-47D0-8727-(E-Mail Removed)...
>I don't know what you exactly means, but when I enter an ip Address in the
> dial-in tab of the user the client gets that (framed) ip address. But I
> would
> like to do it dynamicly. So the appliance does the Radius request and when
> i
> send in the answer of that request a ip address then is it wil works.
>
>
> "Anthony [MVP]" wrote:
>
>> I'd be inclined to start with how the Vodafone appliance allocates
>> addresses,
>> Anthony
>> http://www.airdesk.co.uk
>>
>>
>> "Erik van den Brink" <(E-Mail Removed)> wrote in
>> message news:192124FB-1B12-47D5-8D6B-(E-Mail Removed)...
>> > The clients are GPRS and the appliance used to onnect the clients is
>> > unknown.
>> > I will ask Vodafone what they use. There is a VPN tunnel between the
>> > appliance and the RADIUS server. My idea was to let RADIUS provide an
>> > ip
>> > address from the DHCP server with framed IP.
>> >
>> > "Anthony [MVP]" wrote:
>> >
>> >> What is the appliance, and how is it connected to your DHCP server?
>> >> Anthony,
>> >> http://www.airdesk.co.uk
>> >>
>> >>
>> >> "Erik van den Brink" <(E-Mail Removed)> wrote
>> >> in
>> >> message news:9AD0E1A6-C826-4523-AF40-(E-Mail Removed)...
>> >> > I've setup IAS and DHCP server. Now there is an appliance which
>> >> > request
>> >> > authentication to IAS server. I will also provide an IP Address. The
>> >> > authentication works but I cannot provide an ip address from the
>> >> > DHCP
>> >> > scope.
>> >> > Is this possible and how do i have to setup this?
>> >> > The situation:
>> >> > Client connects to the appliance
>> >> > Appliance RADIUS request (and IP address)
>> >> > Radius Reply to appliance (but no IP Address)
>> >> > Client connect bu t hasn't IP address.
>> >> > When I set an ip address in the dialup tab the client get that ip
>> >> > address
>> >> > but it has to be assigned.
>> >> > I Hope somebody could help.
>> >> >
>> >>
>> >>
>> >>
>>
>>
>>

Erik,

What Anthony is saying is simply that this has nothing to do with IAS.
IAS is only concerned with authentication. The remote access device has to
look after the IP allocation.

"Anthony [MVP]" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> I'm afraid I don't think I can help you. I would expect that to be
> configured at the Vodafone appliance end.
> Anthony,
> http://www.airdesk.co.uk
>
>
> "Erik van den Brink" <(E-Mail Removed)> wrote in
> message news:7A3FBE6E-243D-47D0-8727-(E-Mail Removed)...
>>I don't know what you exactly means, but when I enter an ip Address in the
>> dial-in tab of the user the client gets that (framed) ip address. But I
>> would
>> like to do it dynamicly. So the appliance does the Radius request and
>> when i
>> send in the answer of that request a ip address then is it wil works.
>>
>>
>> "Anthony [MVP]" wrote:
>>
>>> I'd be inclined to start with how the Vodafone appliance allocates
>>> addresses,
>>> Anthony
>>> http://www.airdesk.co.uk
>>>
>>>
>>> "Erik van den Brink" <(E-Mail Removed)> wrote
>>> in
>>> message news:192124FB-1B12-47D5-8D6B-(E-Mail Removed)...
>>> > The clients are GPRS and the appliance used to onnect the clients is
>>> > unknown.
>>> > I will ask Vodafone what they use. There is a VPN tunnel between the
>>> > appliance and the RADIUS server. My idea was to let RADIUS provide an
>>> > ip
>>> > address from the DHCP server with framed IP.
>>> >
>>> > "Anthony [MVP]" wrote:
>>> >
>>> >> What is the appliance, and how is it connected to your DHCP server?
>>> >> Anthony,
>>> >> http://www.airdesk.co.uk
>>> >>
>>> >>
>>> >> "Erik van den Brink" <(E-Mail Removed)>
>>> >> wrote in
>>> >> message news:9AD0E1A6-C826-4523-AF40-(E-Mail Removed)...
>>> >> > I've setup IAS and DHCP server. Now there is an appliance which
>>> >> > request
>>> >> > authentication to IAS server. I will also provide an IP Address.
>>> >> > The
>>> >> > authentication works but I cannot provide an ip address from the
>>> >> > DHCP
>>> >> > scope.
>>> >> > Is this possible and how do i have to setup this?
>>> >> > The situation:
>>> >> > Client connects to the appliance
>>> >> > Appliance RADIUS request (and IP address)
>>> >> > Radius Reply to appliance (but no IP Address)
>>> >> > Client connect bu t hasn't IP address.
>>> >> > When I set an ip address in the dialup tab the client get that ip
>>> >> > address
>>> >> > but it has to be assigned.
>>> >> > I Hope somebody could help.
>>> >> >
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>